Controlling the Load Power Factor Automatically. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 13, Volume 39, Issue 3, September 2014, Page 1-8 PDF (747.55 K) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.2020.102727 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M. Ammar* 1; Saad Saad El-Sayed Eskander2; A. Elmitwally1; A. Shahin1 | ||||
| 1Electrical Engineering Department., Faculty of Engineering., El-Mansoura University., Mansoura., Egypt. | ||||
| 2Professor of Electrical Engineering Department., Faculty of Engineering., El-Mansoura University., Mansoura., Egypt. | ||||
| Abstract | ||||
| This paper focuses on the design and implementation of the automatic control system based on microcontroller that enhances the load power factor (PF) in real time. The system is designed to detect the load power factor and improve it automatically. The system is composed of a microcontroller which compares between the measured load power factor that is received from the energy metering integrated circuit (ADE7763) and a pre-stored value “PF = 0.95”. Based on the calculated difference in power factor, the microcontroller drives the power switches (relays circuit) through an interface circuits to choose the appropriate capacitor bank that is required to improve the power factor. Furthermore, the system is able to send the system power factor data in real time to clients either by a Short Message Service (SMS) through an integrated GSM module or by the World Wide Web (internet) through an Integrated Ethernet Module. | ||||
| Keywords | ||||
| Microcontroller; power factor; power switches; GSM; Ethernet | ||||
|
Statistics Article View: 102 PDF Download: 192 |
||||
