Fault Diagnosis in Dynamic Systems Using Recurrent Neural Networks | ||||
| Menoufia Journal of Electronic Engineering Research | ||||
| Article 12, Volume 29, Issue 2, July 2020, Page 49-56 PDF (1.57 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjeer.2020.103953 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M.A. FKIRIN; RANIA. ELHAG | ||||
| Dept. of Industrial and Control Engineering, Faculty of Electronic Engineering, Menofia University, Egypt. | ||||
| Abstract | ||||
| The aim of this paper is to discuss the methodology of Fault Detection and Diagnosis (FDD) in dynamic systems. Fault diagnosis is characterized as a control system that controls the ability to adapt system component faults automatically. Fault detection is an implementation of using the error signals, where when error signal is zero or approximately zero. A coupled water tank system was used as a study case model for implementing and testing the proposed methodology. The developed system should generate a set of signals to notify the process operator about the faults that are occurring, enabling changes in control strategy or control parameters. Due to the damage risks involved with sensors, actuators and structural faults of the real plant, the data set of the faults are computationally generated and the results will be collected from numerical simulations of the process model. A Recurrent Neural Networks (RNN) is employed in this paper for modeling the used system. This paper shows how to determine the structure and how to estimate the results using the gradient-based algorithm which it is allowed to obtain a Neural Network with relatively small modeling uncertainly. It describes how to increase the stability of dynamic systems using FDD based on RNN. Faults in the study case are faults in the sensors, faults in the actuators and the structural faults. The faults which are presented in the controlled system are reduced to 98% from the default value. | ||||
| Keywords | ||||
| Fault Detection and Diagnosis (FDD); Recurrent Neural Networks (ANN); Level control system for two coupled tanks | ||||
| References | ||||
|
[1] R. Isermann, “Model-based fault-detection and diagnosis-status and applications”, Annual Reviews in control, Vol. 29, pp. 71 – 85, 2005. [2] Mogens Blanke. Michel Kinnaert. Jan Lunze. Marcel Staroswiecki, “diagnosis and fault- tolerant control”, 2nd Edition, 2006, Springer. [3] D. Himmelblau, “Fault Detection and Diagnosis in Chemical and Petrochemical Processes”, Elsevier, Chemical Eng. Monograph Vol. 8, 1978. [4] M. Witczak. “Toward the training of feed-forward neural networks with the D optimum input sequence. IEEE Transactions on Neural Networks”, 17(2):357-373, 2006. [5] J. Korbicz, J. Ko’scielny, Z. Kowalczuk, and W. Cholewa (Eds). Fault diagnosis. “Models, Artificial Intelligence, Applications”, Springer-verlag, Berlin, 2004. [6] R.J. Patton, P. M. Frank, and R. N. Clarke, “Fault diagnosis in dynamic systems: theory and applications”, Prentice Hall, 1989. [7] J. Gertler, “Fault Detection and Diagnosis in Engineering Systems “, New York: Marcel Dekker Inc., 1998. [8] C. Edwards, T. Lombaerts, and H. Smaili, “Fault Tolerant Flight Control: A Benchmark Challenge “, vol. 399. Springer Verlag, 2010. [9] G. Liu. D. Wang, and Y. Li, “Active fault tolerant control with actuation reconfiguration”, IEEE Trans. Aerospace and Electronic Systems, Vol. 40, No. 3, pp. 1110-1117, 2004. [10] D. Theilliol, C. Join, and Y. M. Zhang, “Actuator fault tolerant control design based on a reconfigurable reference input”, Int. J. Appl. Math. Compute. Sci., Vol. 18, No. 4, pp. 553-560, 2008. [11] J. Kim, I, Yang, D. Lee, “Control allocation based compensation for faulty blade actuator of wind turbine “, In proceedings of the 8th IFAC Symposium on fault Detection, Supervision and Safety of Technical Processes, Mexico City, Mexico, 29-31 August 2012; pp. 355-360. [12] S. Simani, P. Castaldi, “Active actuator fault-tolerant control of a wind turbine benchmark model”, Int. J. Robust Nonlinear Control 2014, 24, 1283-1303. [13] Alan S. Willsky, “A survey of design methods for failure detection in dynamic systems”, Automatica, vol. 12, No. 6, pp. 601-611, 1976. [14] R.J. Patton, P. M. Frank, and R. N. Clarke, “Fault diagnosis in dynamic systems: theory and applications”, Prentice Hall, 1989. [15] Diago Leite Reboucas, Fabio Meneghetti Ugulino de Araujo, Andre Laurindo Maitelli, “USE OF ARTIFICIAL NEURLAR NETWOKS TO FAULT DETECTION AND DIAGNOSIS, ABCM Symposium Series in Mechatronics- vol. 5, 2012. [16] Svetla Vassileva, Lyubka Doukovska, Vassil Sgurev, “AI-BASED DIAGNOSTICS FOR FAULT DETECTION AND ISOLATION IN PROCESS EQUIPMENT SERVICE”, Computing and Informatics, Vol. 33,pp. 387–409,2014. [17] Ahmad Azharuddin Azhari Mohd Amiruddin, Haslinda Zabiri, Syed A. Taqvi, Lemma Dendena Tufa, “Neural network applications in fault diagnosis and detection: an overview of implementations in engineering-related systems”, ResearchGate, vol. 12, No. 6, pp. 268-275, 2018. [18] Hye-Rin Hwang's, Berm-Soo Kim's, Tae-Hyun Cho's, In-Soo Lee's, “Implementation of a Fault Diagnosis System Using Neural Networks”, International Journal of Control Automation and Systems (INT J CONTROL AUTOM), 2019. | ||||
|
Statistics Article View: 250 PDF Download: 201 |
||||
