DEVELOPMENT AND PERFORMANCE EVALUATION A CENTRIFUGAL BROADCAST SEEDER | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 1, Volume 28, Issue 3, July 2011, Page 556-570 PDF (526.14 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2011.104863 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| G. G. Radwan1; A. S. El-Ashry2 | ||||
| 1Res., Ag. Eng. Res. Inst., Ag. Res. Center, Dokki, Giza, Egypt. | ||||
| 2Sen. Res., Ag. Eng. Res. Inst., Ag. Res. Center, Dokki, Giza, Egypt. | ||||
| Abstract | ||||
| Thiswork was carried out to develop and evaluate a fertilizer broadcasting machine to be suitable for spreading small seeds such as linseed. The developed spreader was evaluated and tested at EL-Gemmiza Agricultural Research Station, EL-Gharbia Governorate under four forward speeds : 1.74 , 2.82 , 3.99 and 5.07 km/h, four disc revolving speeds of 270, 350 , 430 and 510 rpm ( 6.08, 7.88, 9.68 and 11.48 m/s ) and three ratio of feeding screw to land wheel speed ( kinematic parameters ) of 1.61 , 2.23 and 4.14 gave twelve rotating speed of screw which were 27.77 , 38.47 , 45.08 , 62.44 , 64.24 , 71.42 , 81.56 , 88.98 , 112.97 , 115.92 , 165.19 and 209.73 rpm. Spreader productivity, energy requirement and distribution uniformity had been determined. The results showed that, it is possible to use the centrifugal broadcast machine after adding feeding device and making some modifications on its motive power in spreading small seed crops. The optimum value for the operation conditions were obtained at forward speed 3.99 km/h, spinner speed 510 rpm ( 11.48 m/s ) and feeding screw speed 88.98 rpm (0.35 m/s kinematic parameter 2.23 ) were as given the best result of productivity rate (5.32 fed/h), energy consumption ( 16.37 Mj/fed ) and distribution uniformity with coefficient of variation 33.32% . | ||||
| References | ||||
|
Ahmed, S.F.; M.A. shaibon and A.E. Sayedahmed(1990). The field performance of an experimental spinner-type fertilizer spreader. Misr J. Ag. Eng., 7(4): 348-358.
ASAE Standard (1997). Test procedure for dry fertilizer spreaders . Ag. Eng. yearbook.
Awady, M.N. and A. S., EL-Said (1985). Design factors for a simple grain-drill feeding mechanism. Misr J. Agric. Eng., 2(2) Apr 1985.
Bader, S. E and A. S. El. Ashry, (2003). Effect of soil leveling, planting method and seeding rate on flax crop and its components. The 1st Egyptian Syrian conference Elminy Uni. December, 2003.
Bansal, R.K.; O. EL. Charrast and Hamitton J.H., (1989). A roller type positive-feed mechanism for seed metering. J. Agric. Engng., Res 43, 23-31.
Hamad, S.A., and Banna, A.B., (1980). The grain drill Cz 3.6, and its viability for sowing different size seeds. J. Agr. Sci. Mansoura Univ. 5: 76-85.
Griffis, C.L.; D.W. Ritter and E.J. Mathews (1983). Simulation of rotary spreader distribution patterns. Trans of the ASAE, 26(1): 33-37.
Morad, M.M. (1990). Basic requirements in the design and development of the fertilizer broadcasting spreader. Misr J. Ag. Eng., 7(4): 402-411.
Moard, M.M.; W.M Mechail and A.A Sayedahmed (2002). Development of a simulation model of the spinning disc performance in the broadcaster fertilizer spreaders. Misr J. Ag. Eng., 19(4): 945-957.
Nakib, A.A (1990). Design and evaluation of a rotary broadcast-spreader unit appropriate for small-size holdings. Misr J. Ag. Eng., 7(2): 132-146.
Reed, W. B and E. Wacker (1970). Determining distribution pattern of dry fertilizer applicators. Tran of the ASAE, 13 (1): 85-89.
Sirvastava, A.C. (1993). Engineering principles of Agric. Machines ASAE Textbook No.6 Published the ASAE. | ||||
|
Statistics Article View: 247 PDF Download: 377 |
||||
