DEVELOPMENT AND EVALUATION OF THE METERING DEVICE OF PLANTER TO BE SUITABLE FOR GARLIC GLOVES PLANTING | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 3, Volume 28, Issue 2, April 2011, Page 282-301 PDF (1.65 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2011.105093 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M. M. A. El-Sharabasy; M. M. A. Ali | ||||
| Assist. Prof. of Agric. Eng. Dept., Fac. of Agric., Zagazig Univ., Egypt. | ||||
| Abstract | ||||
| The object of this study was to develop and evaluate the metering device of planter (Gaspardo) to be suitable for garlic gloves planting. The developed planting unit consists of gloves hopper, moving disc, fixed disc and mixer. This machine was evaluated to find out the optimum operating parameters for planting garlic cloves using versus nine different moving discs (12 cells) having three different cell diameters of 20, 2.5 and 30 mm and three different disc thicknesses of 20, 25 and 30 0m and four machine forward speeds of 1.17, 1.83, 2.61 and 3.65 km/h. The obtained results revealed that the maximum plant emergency ratio of 97.10 % for garlic gloves, the minimum missing hills of 5.1 % and the minimum longitudinal shattering of 0.48 cm were recorded at lower machine forward speed of 1.17 km/h, cell diameter of 30 mm and disc thickness of 30 mm. The minimum missing hills of 5.10 % was recorded at lower machine forward speed of 1.17 km/h, cell diameter of 30 mm and disc thickness of 30 mm. The maximum field capacity and minimum field efficiency of 0.176 fed/h and 67.43 % were recorded at higher machine forward speed of 3.65 km/h.The minimum power required and maximum energy consumed of 9.07 kW and 127.75 kW.h/fed were recorded at lower machine forward speed of 1.17 km/h.The minimum planting cost of 91.08 L.E/fed was recorded at higher machine forward speed of 3.65 km/h compared with manual planting which recorded 438.75 L.E/fed. | ||||
| References | ||||
|
Awady, M. N. (1978): Tractor and farm machinery. Text book, Faculty of Agriculture, Ain-ShamsUniversity. Pp: 164-167.
Awady, M. N; E. Y. Ghoneim and A. I. Hashish (1982): A critical comparison between wheat combine harvester under Egyptian conditions. R. S. No. 1920, Ain-ShamsUniversity. (FAO) J.
El-Ashry, A. S. (2004). Modification of a potato planting machine to suit garlic crop. Misr J. Agric. Eng., 21(3): 657-668.
Harb, S. K. and H. M. Abdel- Mawla (1997). Development of a two-row garlic planter. Misr J. Agric. Eng., 14 (1): 144-155.
Hassan, A. A. (1991): Production of vegetable crops. First edition, Arab publ. and Dist., Cairo: 570-578.
Helmey, M. A; S. M. Gomaa and M. E. Badawy (2005): Modification and evaluation of garlic planter. Misr J. Agric. Eng., 22 (2): 663-687.
Hunt, D. (1983): Farm power and machinery management. 8th Ed. Iowa state Univ., Press Ames, USA. Ames, Iowa, USA: 364-368. inpho/content/compend/ae622e/ae622e14.htm.
Jiaporn, B. (2002): Final report “Design and Development of Garlic Planter attached to 5 HP power tiller.” Project. Department of Agricultural Engineering, Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang, Thailand. (Mimeographed).
Kepner, R. A; K. Bainer and E. L. Barger (1982): Principles of farm machinery. 3rd Ed., AVI Pub. Com. Inc., Westport. 527pp.
Mossa, A. I. (1999): Mechanical planting performance unites for three different crops. Misr J. Agric. Eng., 16(4): 84-92.
Steel and Torrie (1980): Principles and procedures of statistics. McGraw-Hill Company N.Y.
United Nations Food and Agriculture Organization (FAO), (2009): Garlic post harvest operations manual. CHAPTER XXXIIIII. www.fao. org/
Yenpayub, J; S. Kingthong and J. Benjaphragairat (2006): design and development of a garlic planter in Thailand. M. Sc. Agricultural Engineering Department, Faculty of Engineering, King Mongkut’s Institute of Technology Lardkabang, Bangkok, Thailand 10520. | ||||
|
Statistics Article View: 130 PDF Download: 190 |
||||
