DEVELOPMENT OF A LOCAL SINGLE SCREW EXTRUDER FOR PRODUCING EXPNDED BREAKFAST CREAL | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 42, Volume 27, Issue 4, October 2010, Page 1688-1709 PDF (757.83 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2010.105099 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| O.A Kaddour | ||||
| Senior researcher- Agriculture Engineering Research Institute (AEnRI), Egypt. | ||||
| Abstract | ||||
| Extrusion cooking has been used in industries for many years to produce various types of human foods and animal feeds. Twin screw extrusion used for the production of expanded breakfast cereal. This work aimed to develop a local single screw extruder to produce the breakfast cereal by modifying extruder die and cutter knife units. The performance of the developed extruder was studied as a function of change in the physical and mechanical factors affecting the shear in extrusion barrel such as screw speed of( 354and 438 RPM) , the clearance between the last screw unit and die of (3,10 and 20mm), number of holes in the die (1,3,6 and 9 holes) as mechanical factors and formula moisture content of (19,24 and 29%w.b.) as physical factors . Results indicated that the most effective operating range for these parameters was 438 rpm, 3 mm, 6 holes and 24%w.b., respectively, which led to an extruder productivity of 253.56 kg/h, specific mechanical energy (SME) of 67kW.h/ton and good product quality with 0.716 g/cm3 product bulk density, 93.18 %durability, 1.63 expansion ratio and 41.83% cereal water absorption. | ||||
| References | ||||
|
AACC. 1984. Approved Methods of the AACC, 8th Ed., Method 44-15. American Association of Cereal Chemists. Paul, MN.
Alexander, R.J. 1979. Corn Dry Milling: Process, Products and Applications. In: Corn Chemistry and Technology, 351-375. S.A. Watson and P. E. Ramstad, eds. merican Association of Cereal Chemists. St Paul, MN.
Alvarez-Martinez, L., Kondury, K. P., and Harper, J. M. 1988. A general model for expansion of extruded products. J. Food Sci. 53:609-615.
ASAE 2000 S319.3: Method of determining and expressing fineness of feed materials by sieving. In ASAE Standards 2000, 563-566. St. Joseph, Mich.: ASAE.
Bhattacharya, M., and Hanna, M. 1987. Textural properties of extrusion-cooked corn starch. Lebensm.-Wiss. u.-Technol. 20:195-201.
Colonna, P., Tayeb, J., and Mercier, C. 1989. Extrusion cooking of starch and starchy products. In Extrusion Cooking, 247-319. C. Mercier, P. Linko, and J. M. Harper, eds.American Association of Cereal Chemist, St Paulk, MN.
Desrumaux, A., Bouvier, J. M. and Burri, J. 1998. Corn grits particle size and distribution effects on the characteristics of expanded extrudates. J. Food Sci. 63:857-863.
Ding Qing-Bo; Ainsworth, P.; Tucker, G. and H. Marson. 2005. The effect of extrusion conditions on the physicochemical properties and sensory characteristics of rice-based expanded snacks, Journal of ood Engineering, 66(3):283-289
Hoseney, R. C. 1994. Principles of Cereals, 2nd ed. American Association of Cereal Chemists, Inc. St Paul, MN.
Hsieh, F., Peng, I. C. and Huff, H. E. 1990. Effects of salt, sugar and screw speed on processing and product variables of corn meal extruded with a twin-screw extruder. J.Food Sci. 55:224-227.
Ibrahim, M. K. E., 1982, Wet milling wheat grain. M. Sc. Th., Fac. Of Agric. Mansoura Univ. 64 – 65.
Jones,D., Chinnaswamy,R., Tan,Y., and Hanna.M. 2000. Physiochemcial properties of ready-to-eat breakfast cereals.CFW Research, American association of cereal chemists, Inc. 45(4)164-168.
Nehru. C., K.Muthukumarappan, K.A. Rosentrater and J.L. Julson. 2006. Effect of die dimensions on extruder processing parameters and extrudate properties for distillers grains based feeds. 2006 ASABE Annual International Meeting Sponsored by ASABE. Portland Convention Center. Portland, Oregon. 9 - 12 July 2006.
Patil .R. T. , J. J. Berrios, J. Tang, J. Pan and B. Swanson .2005. Empirical Modeling of Extrusion Cooking of Chickpea Flour for Process Scale Up. 2005 ASAE Annual International Meeting Sponsored by ASAE. Tampa Convention Center .Tampa, Florida
17 - 20 July 2005
Patil, R.T.; Joshi, K.C.; Gupta, S. and A. Saran. 2000 Extrusion cooking characteristics of soywheat blends to produce ready to eat snacks.Journal of Agricultural Engineering(ISAE) 37(3): P11-19.
Rooney, L. W., and Serna-Saldivar, S.O. 1987. Food uses of whole corn and dry- milled fractions. In: Corn Chemistry and Technology, 399-429. S.A. Watson and P. E. Ramstad, eds. American Association of Cereal Chemists. St Paul, MN. | ||||
|
Statistics Article View: 119 PDF Download: 191 |
||||
