FACTORS AFFECTING THE PERFORMANCE OF AN INDENTED CYLINDER SEPARATOR
Tawfik, M., El-Shal, A., El-Fawal, Y. (2011). FACTORS AFFECTING THE PERFORMANCE OF AN INDENTED CYLINDER SEPARATOR. EKB Journal Management System, 28(2), 401-415. doi: 10.21608/mjae.2011.105264
M. A. Tawfik; A. M. El-Shal; Y. A. El-Fawal. "FACTORS AFFECTING THE PERFORMANCE OF AN INDENTED CYLINDER SEPARATOR". EKB Journal Management System, 28, 2, 2011, 401-415. doi: 10.21608/mjae.2011.105264
Tawfik, M., El-Shal, A., El-Fawal, Y. (2011). 'FACTORS AFFECTING THE PERFORMANCE OF AN INDENTED CYLINDER SEPARATOR', EKB Journal Management System, 28(2), pp. 401-415. doi: 10.21608/mjae.2011.105264
Tawfik, M., El-Shal, A., El-Fawal, Y. FACTORS AFFECTING THE PERFORMANCE OF AN INDENTED CYLINDER SEPARATOR. EKB Journal Management System, 2011; 28(2): 401-415. doi: 10.21608/mjae.2011.105264

FACTORS AFFECTING THE PERFORMANCE OF AN INDENTED CYLINDER SEPARATOR

Misr Journal of Agricultural Engineering
Article 10, Volume 28, Issue 2, April 2011, Page 401-415  XML PDF (742.3 K)
Document Type: Original Article
DOI: 10.21608/mjae.2011.105264
View on SCiNiTO View on SCiNiTO
Authors
M. A. Tawfik1; A. M. El-Shal1; Y. A. El-Fawal2
1Lecturer , Agric. Eng. Dept. Fac. of Agric., Zagazig Univ., Egypt.
2Res., Ag. Eng. Res. Inst., Ag. Res. Center, Dokki, Giza, Egypt.
Abstract
The aim of this study was to evaluate some engineering and operational factors affecting the performance of an indented cylinder separator on the basis of grain length for local varieties of two main grain crops in Egypt, wheat (Gimeza 7) and corn (hybrid- 310).The evaluation was identified at various cylinder speeds of 30, 35, 40 and 45 rpm. corresponding to peripheral speeds of  0.94 ,1.10, 1.26 and 1.41 m/s respectively, receiving trough angles of 30° ,40°, 45° and 50°and feed rate of 6, 12, 18, and 24 kg/h at cylinder slope of zero. The obtained results revealed that the separating efficiency decreased by increasing each of the cylinder speed, receiving trough angle and feed rate. Also, the results indicated that the cylinder separator can be operated at rotational speeds ranged from 30 rpm (0.94 m/s) to 35 rpm (1.10 m/s) and receiving trough angles from 30º to 40º and feed rate of 6 kg/h to achieve the best values of separating efficiency with minimum percentage of lifted long grains in the trough for wheat and corn. So the combination of 30rpm(0.47 m/s) cylinder speed, 30º trough angle, and 6 kg/h feed rate is recommended for the highest values of separating efficiency of 92.54 and 91.35% for wheat and corn respectively.
Keywords
indented cylinder; peripheral speed; cylinder slope; trough
References
Berlage, A.G., D.M Bilsland, N.R. Brandenburg and T.M Cooper 1984. Experimental indented cylinder for separating seed. Trans. of the ASAE, 27 (2): 358- 361.

Fouad, H.A. 1980. The effect of cell configuration on length grading of beans. J. Agric. Eng. Res., England, 25:391-404

Klenin, N. I., I. F. Popov and V.A. Sakun 1985.Agricultural machines. Theory of operation, computation of controlling parameters and the condition of operation .Amerind Publishing Co.,PVT.Ltd., New Delhi, India :483-488 PP.

Sarkar, A.K. 1993. Flour milling. In: Grains and oilseeds- Handling ,Marketing and Processing. Vol. 2, 4th ed., Canadian International Grain Institute, Winnipeg, Canada.

Wang, Y. J., D. S. Chung , S. R. Spillman, S. R. Eckhoff , C. Rhee and H. H. Converse 1994.Evaluation of laboratory grain cleaning and separating equipment – Part 1. Trans. of the ASAE, 37(2): 507-513.

Yamashita, R. 1985. Rice processing machinery. Textbook of Japanese International Cooperation Agency (JICA), Kyoto University, Japan.

Statistics
Article View: 275
PDF Download: 233