DESIGN AND MANUFACTURING OF A PROTOTYPE FOR SUNFLOWER SEEDS HULLING
Gamea, G., Mohmed, M. (2011). DESIGN AND MANUFACTURING OF A PROTOTYPE FOR SUNFLOWER SEEDS HULLING. EKB Journal Management System, 28(2), 468-486. doi: 10.21608/mjae.2011.105269
G. R Gamea; M. E. Mohmed. "DESIGN AND MANUFACTURING OF A PROTOTYPE FOR SUNFLOWER SEEDS HULLING". EKB Journal Management System, 28, 2, 2011, 468-486. doi: 10.21608/mjae.2011.105269
Gamea, G., Mohmed, M. (2011). 'DESIGN AND MANUFACTURING OF A PROTOTYPE FOR SUNFLOWER SEEDS HULLING', EKB Journal Management System, 28(2), pp. 468-486. doi: 10.21608/mjae.2011.105269
Gamea, G., Mohmed, M. DESIGN AND MANUFACTURING OF A PROTOTYPE FOR SUNFLOWER SEEDS HULLING. EKB Journal Management System, 2011; 28(2): 468-486. doi: 10.21608/mjae.2011.105269

DESIGN AND MANUFACTURING OF A PROTOTYPE FOR SUNFLOWER SEEDS HULLING

Misr Journal of Agricultural Engineering
Article 14, Volume 28, Issue 2, April 2011, Page 468-486  XML PDF (671.25 K)
Document Type: Original Article
DOI: 10.21608/mjae.2011.105269
View on SCiNiTO View on SCiNiTO
Authors
G. R Gamea1; M. E. Mohmed2
1Associate prof. of Agric. Eng., Fac. of Agric., Minoufiya Univ., Egypt.
2Associate lecturer of Agric. Eng., Fac. of Agric., Minoufiya Univ., Egypt.
Abstract
Sunflower seed oil is considered to be one of the major edible oil in the world. In Egypt sunflower became an important crop as a source of oil and protein. Attention was paid for extending the cultivated area and growing varieties of high oil content to cover a part of the deficit in the production of edible oils. Sunflower is considered multipurpose crop, but oil was largest usage. If the seed hulls are removed before processing it leads to decrease the production cost of edible oil and decrease the wax and coloring matters. So that, sunflower seeds need to be hulled and a hulling machine is needed to reduce the wax and coloring matters.The main objective of present study is to investigate the effect of some factors affecting performance of prototype for sunflower seeds hulling. In order to fulfill the aim of study, the hulling prototype was manufactured with tools to control rotating disc speed, clearance between rotating disc and fixed disc. The result showed that the best degrees of hulling efficiency obtained with the best broken kernel percentage were at 1500 r.p.m rotating disc speed, 3mm clearance, 40 cm rotating disc diameter. The highest obtained values of hulling efficiency were (70.21%) with (9.1%) broken kernel at 10% moisture content, (77.52%) with (20.1%) broken kernel at 8% moisture content and (83.99%) with (22.3%) broken kernel at 6% moisture content. The prototypes succeeded as a step forward to the complete design. 
Sunflower seed oil is considered to be one of the major edible oil in the world. In Egypt sunflower became an important crop as a source of oil and protein. Attention was paid for extending the cultivated area and growing varieties of high oil content to cover a part of the deficit in the production of edible oils. Sunflower is considered multipurpose crop, but oil was largest usage. If the seed hulls are removed before processing it leads to decrease the production cost of edible oil and decrease the wax and coloring matters. So that, sunflower seeds need to be hulled and a hulling machine is needed to reduce the wax and coloring matters.The main objective of present study is to investigate the effect of some factors affecting performance of prototype for sunflower seeds hulling. In order to fulfill the aim of study, the hulling prototype was manufactured with tools to control rotating disc speed, clearance between rotating disc and fixed disc. The result showed that the best degrees of hulling efficiency obtained with the best broken kernel percentage were at 1500 r.p.m rotating disc speed, 3mm clearance, 40 cm rotating disc diameter. The highest obtained values of hulling efficiency were (70.21%) with (9.1%) broken kernel at 10% moisture content, (77.52%) with (20.1%) broken kernel at 8% moisture content and (83.99%) with (22.3%) broken kernel at 6% moisture content. The prototypes succeeded as a step forward to the complete design. 
References
Abdel-Mageed. H. N. (1989), Lentil hulling as affected by grain treatments and husking machine performance. Misr j. Ag. Eng., 6(2): 166- 176.

El-Raie, A. E. S. (1987), Properties of shelled corn related to mechanical separation. Misr J. Ag. Eng., 4(1), P: 36-51.

Ismail. Z. E. (1994), Development of a local rice husker machine for lentil hulling. Misr j. Ag. Eng., 11(1): 210-226.

InternationalDevelopmentResearchCenter, Ottawa, Canada. Chapter (3) Hulling and processing of oil seeds. Updated: 10 november (1998).

Radwan, S. M. (1987), Engineering studies on determining rice processing losses. Unpublished M. SC. Thesis, Dept. of Ag. Mech. Mansoura uni., PP. 120.

Tayel, S. A. and M. F. A.. Khairy. (1988), Astudy on some design criteria of sunflower shelling  machine. Misr j. AG. Eng., 5 (3): 307- 316.

إبراهیم، ع . ف. ، شرعان، ع. ن. 1991. عباد الشمس. مشروع البرنامج القومی للنهوض ببعض المحاصیل - کلیة الزراعة- جامعة القاهرة .

مرسى، م. أ. 1980. محاصیل الزیوت. مکتبة الأنجلو المصریة. القاهرة.ج .م.ع

مصطفى،  م.  م. 2001. مشروع تعظیم إنتاج الزیوت من عباد الشمس والاستفادة من النواتج الثانویة - کلیة الزراعة – جامعة المنوفیة.

Statistics
Article View: 120
PDF Download: 178