EVALUATION OF LOCALLY MADE CLOVER THRESHER AND SEPARATOR | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 1, Volume 27, Issue 3, July 2010, Page 746-759 PDF (904.83 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2010.105425 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| R. A. WERBY; A. ELSAID; S. H. M. Dosoky | ||||
| Lect., Ag. Eng. Dept., Fac.of Ag., Al-Azhar Univ., Egypt. | ||||
| Abstract | ||||
| The present study was to evaluate the performance efficiency of stationary threshing and separating machines of wheat crop ( locally manufactured). The same thresher was used to thresh and separate clover crop. To extend the operational use of this machine and consequently decrease the operating cost per hour, reduce threshing and separation losses and increase seed quality, the performance of local manufacture machine was tested to suit clover crop. Threshing drum speeds tested were 350, 450, 550 and 650 r.p.mand feed rates 6, 10, 14 and 18 kg /minwith straw moisture contents 9.8 %, seed moisture contents 10.5 %, air speed in cleaning 6 m/s, slope of sieves was 30 with horizontal and vibrating screen speed of 350 rpm. The experimental results revealed machine productivity, total seed damage, un-threshed seed losses with straw, machine efficiency and the unit-energy consumption. The optimum operating conditions for threshing and separating clover were found to be 550 r.p.m at feed rate 14 kg/min with straw moisture content 9.8 %, seed moisture content 10.5 %, air speed in cleaning 6 m/s, slope of sieves at 30 with horizontal and vibrating screen speed at 350 rpm, to avoid the highest rate of resulted with losses and seed damage. Threshing capacity of 4.43 kg / min, total seed damage of 3.6 %, un-threshed seed of 0.91%, seed losses with straw of 0.29 % threshing efficiency of 95.2%, consumed power of 9.57 kW and energy consumed of 35.97 kW .h /ton including operation and losses. | ||||
| References | ||||
|
Abdelmotaleb, I. A.; M. M. Ibrahim and I. S. Yousef (1999). A study on harvesting of soyabean and sunflower crops. Misr J. Agric. Eng., 16 (2): 337-350.
Abo EI-Naga, M. ( 1995). A study on mechanizationof balady bean perdition in small holdings. M. Sc. Thesis, Agric. Eng. Dept., Faculty of Agric. Zagazig Univ., Egypt.
Abo EI-Naga, M., H. EI-Gendy and E. Mosa (2005). Evaluation of local threshing machine performance for threshing lentil crop. Misr J. Agric. Eng., 22 (2): 376-388.
Awady, M.N., I. Yehia, M. T.Ebaid, and E. M. Arif, ( 2003). Development and theory of rice cleaner to reduce impurities and losses. Misr J. Agric. Eng., 20 (4): 53 – 68.
Baiomy, M. A. (2002). Improvement of locally made paddy thresher. Misr J. Agric. Eng. , 19 (1): 246-254.
EI-Behiry, A. A. (1995). Development and evaluation of multi-crop threshing. Ph D. Thesis, Agronomy and Agric. Mech. Dept., Faculty of Agric. Moshtohor, Zagazig Univ., Egypt.
El-Haddad, W. Z. ( 2004). Manufacture and evaluation chopping, threshing and winnowing machine suitable for the requirements of some crops residues reticulation. Ph. D. Thesis, Agric. Mech. Dept., Fac. of Agric., Kafr El-Sheik University.
Embaby, A. T. (1985). A comparison of different mechanization system for cereal crop production . M. Sc. Thesis, Agric. Eng. Cairo Univ.
Helmy. M. A. (1988).Threshing parameters affecting the performance of local and foreign wheat threshing machines. Misr J. Agric. Eng., 5 (4): 329-343.
Sharma. K. D. and R. S. Devnani (1980). Threshing studies on soyabean and cowpea. AMA. 33 (2): 65-68.
Sudajan A.,; V. M. Salokhe and K. Triratanasirichai (2002). Effect of type of drum, drum speed and feeding rate on sunflower threshing. Bios stems Engineering, 83 (4): 413-421.
Werby. A. R. ( 2009). Performance cleaning unit for clover seeds affecting some physical and mechanical properties. Misr J. Agric. Eng., 2 (1): 212- 227. | ||||
|
Statistics Article View: 117 PDF Download: 199 |
||||
