PHYSICAL AND MECHANICAL PROPERTIES OF CANTALOUPE APPLIED TO DESIGN SEED-EXTRACTION MACHINE
Yehia, I., Arif, E., El Lithy, A., Atallah, M. (2010). PHYSICAL AND MECHANICAL PROPERTIES OF CANTALOUPE APPLIED TO DESIGN SEED-EXTRACTION MACHINE. EKB Journal Management System, 27(2), 600-612. doi: 10.21608/mjae.2010.105849
I. Yehia; E. M. Arif; A. M. El Lithy; M. M. Atallah. "PHYSICAL AND MECHANICAL PROPERTIES OF CANTALOUPE APPLIED TO DESIGN SEED-EXTRACTION MACHINE". EKB Journal Management System, 27, 2, 2010, 600-612. doi: 10.21608/mjae.2010.105849
Yehia, I., Arif, E., El Lithy, A., Atallah, M. (2010). 'PHYSICAL AND MECHANICAL PROPERTIES OF CANTALOUPE APPLIED TO DESIGN SEED-EXTRACTION MACHINE', EKB Journal Management System, 27(2), pp. 600-612. doi: 10.21608/mjae.2010.105849
Yehia, I., Arif, E., El Lithy, A., Atallah, M. PHYSICAL AND MECHANICAL PROPERTIES OF CANTALOUPE APPLIED TO DESIGN SEED-EXTRACTION MACHINE. EKB Journal Management System, 2010; 27(2): 600-612. doi: 10.21608/mjae.2010.105849

PHYSICAL AND MECHANICAL PROPERTIES OF CANTALOUPE APPLIED TO DESIGN SEED-EXTRACTION MACHINE

Misr Journal of Agricultural Engineering
Article 11, Volume 27, Issue 2, April 2010, Page 600-612  XML PDF (587.24 K)
Document Type: Original Article
DOI: 10.21608/mjae.2010.105849
View on SCiNiTO View on SCiNiTO
Authors
I. Yehia1; E. M. Arif2; A. M. El Lithy3; M. M. Atallah4
1Chief Res., Ag. Eng. Res. Inst., Egypt.
2Senior Res., Ag. Eng. Res. Inst., Egypt.
3Associ. Prof, Ag. Eng., Ag. Col., Azhar U., Assuit, Egypt.
4Res., Ag. Eng. Res. Inst., Egypt.
Abstract
The aim of this research is to study some physical and mechanical properties of cantaloupe, as promising fruits, to help the design of handling machines. The physical and mechanical properties are incorporated in the development of the seed-extraction machine as a case study.
The main results in this study can be summarized as follows:
Physical properties of cantaloupe fruits: diameter = 82.12 – 113.51 mm, height = 82.07 – 119.95 mm, mass = 329.2 – 940.6 g, volume = 380 - 860 cm3, projected area = 85.85 – 160.95 cm2, real density = 0.69 – 1.08 g/cm3, bulk density = 0.51 g/cm3, sphericity =  0.88 – 1.07.
Mechanical properties: the average of cantaloupe-fruit firmness was 62.5 N/cm2, the maximum = 80.4 N/cm2 and the minimum = 28.6 N/cm2.
The physical and mechanical properties are incorporated in the design of the cantaloupe-fruit convey tube, holding mechanism and separated mechanism (vibrated chain-belt) of the designed seed-extraction machine is given also in the paper as a case study.
References
Abou-Elmagd, A.E.; Hamam, A. S.; EL-Saadany, M. A.  and El-Kawaga, S. A., 2002, Design of  a cone-end detacher for orange picking, Misr. J. Ag. Eng. 19(2): 491-507.

Abou-Elmagd, A.E.; Abd El-Mageed, H. N., Baiomey, M. A.,  and Sayed-Ahmed, I. F., 2006, Proper design and evaluation of an equipment for extracting watermelon seeds, J. Agric Sci. Mansoura Univ., 31(7): 53-68.

Akubuo, C.O. and Odigboh, E. U., 1999, Egusi fruit coring machine. J. Agric. Engng Res. 74: 121-126.

Arabsalmani, K., 1996, Evaluation of flowering, fruiting and effect of seed extraction time on seed quality characters of cantaloupe (cucumis melo), M. Sc., Th., Univ. of Tabriz, Iran: 65 – 80.

Awady, M. N.; Yehia, I. Hassan, M. A. and El Lithy, A. M., 2004, Some physical and mechanical properties of Minneola fruits, Misr J. Ag. Eng., 21(2): 669-684.

Buyanov, A. I. And Voronyuk, B. A., 1985, Physical and mechanical properties of plants, Fertilizers and Soils, Amerind Pub. Co., PVT, LTD, New Delhi, Bombay, Calcutta, New York: 15 - 97.

El Sayed, G. H., Harb, S., Yehia, I., and Arif, E. M.,  2009, Developmentof an automatic juicer for minneola fruits, Misr J. Ag. Eng., 34(4): 4155-4167.

Hassan, A. A., 1994, Physiology, production and certification of vegetables seeds, 1St Ed., El Dar El Arabia Pub., Cairo, Egypt (in Arabic): 130-137.

Ministry of Agriculture, 2009, Agricultural statistics, Economical Issues Sector, Cairo, Egypt: 84-107.

Mohsenin, N. N., 1986, Physical properties of plant and animal materials, Gordon and Breach Sc. Pub., N. Y.

Rashidi, M. and Seyfi, K., 2007, Classification of fruit shape in cantaloupe using the analysis of geometrical attributes, World J. of Ag. Sciences, Iran, 3(6): 735-740.

Vergano, P.J.; R.F. Testion; A.C. Choudhari and W.C. Newall. (1992). Peach vibration bruising: The effect of paper and plastic films between peaches. J. of Food Quality 15(3):183-197.

Wilhelm, L. R., Suter, D. A. And Brusewitz, G. H., 2005, Physical properties of food materials, Food and Processing Eng. Tech., ASAE, St. Joseph, Michigen, USA: 75 – 85.

Yehia, I., Kabeel, M. H, and Abdel Galeel, M. M., 2009, Physical and mechanical properties of Ponkan mandarin applied to grading machine, Misr J. Ag. Eng. 26(2): 1036-1053.

Statistics
Article View: 139
PDF Download: 195