EVALUATING THE PERFORMANCE OF A LOCALLY COMBINE FOR HARVEST WHEAT CROP | ||||
Misr Journal of Agricultural Engineering | ||||
Article 7, Volume 27, Issue 1, January 2010, Page 104-121 PDF (757.36 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/mjae.2010.106862 | ||||
View on SCiNiTO | ||||
Authors | ||||
M.H.M. Abo EL-Naga1; M.A. El-Said Shetawy.2; Sh.F Abed El-Hammed3 | ||||
1Senior Researcher, Agric.Eng. Res. Inst., Dokki, EL- Giza, Egypt. | ||||
2Lect. Agric. Eng. Dept. Fac. of Agric., Al-Azhar Univ. Egypt. | ||||
3Researcher,Agric. Eng. Res. Inst., Dokki, EL-Giza, Egypt | ||||
Abstract | ||||
Minimize of all harvest losses for wheat crop represent the important factor for upgrade harvest system The present study aimed to evaluate a locally combine for harvest wheat crop The experiments were carried out in Barkeen Village – Dakahlia Governorate during two seasons (2008 – 2009) for harvesting wheat crop (Sakha 93) at forward speed of 0.53, 0.70, 0.95 and 1.15 km/h, and at grain moisture contents of 16.73, 14.41 and 12.13 % during standard drum speed of 24.74 m/s. The pre-harvesting losses for (sakha 93) w as about 0.28% at grain moisture content of 12.13% , straw moisture content of 25.73% and daily times of 12PM.While,the highest value of total grain losses 2.08 % was obtained at forward speed of 1.15 km/h and grain moisture content of 16.73 %.The highest performance efficiency of machine 98.91% was obtained at forward speed of 0.53 km/h and grain moisture content of 12.13 % While, the highest cutting efficiency 94.81 % were obtained at forward speed of 0.53 km/h and grain moisture content of 12.13 %.The highest effective field capacity and efficiency (0.48 fed;/h and 78.38%) were obtained at forward speed of (1.15 and 0.53 km/h) and grain moisture content of 12.13 %, respectively. Whereas .the lowest value of energy requirements 311.01 kW.h/fed; was at forward speed af 1.15 km/h and grain moisture content af 12.13%, respectively. The lowest value of criterion cost 312.10 L.E / fed; were obtained at forward speed of 1.15 km/h and grain moisture content of 12.13% . | ||||
References | ||||
Ebaid M. T.; A. A. Abd EL-Rahman; G. G. Radwan and H.E.Osman(2004).Development a threasher for wheat crop of beater type for maximum productivity Misr J. Agr. Eng., 21 (1): 14-28.
EL-Danasory M. M. and A. T. Imbabi(1998). Study on mechanical and manual pick up and Baling of wheat straw after harvesting with combine. Misr J. Agr. Eng., 15(2): 246-260.
EL-Khateeb, H. A. (2005). A study on performance of axial flow combine harvester in rice crop harvesting. The 13th conference of the Misr Society of Agr. Eng., 14-15 December 2005:381-401.
EL-Sayed G. H.; M. A. EL-Ataar and E. M. Arif (2002). Mechanical harvesting of sun flower using the general purpose combine. The 10th annual conference of the Misr of Agr Eng,16-17 October2002:155-172
Hassan, M.A.; M. M. Morad; M. A. EL-Shazly and A.Farag(1994). Studyon some operating parameters affecting the performance of combine devices with reference to grain losses. Misr J. Agric. Eng., 11(3): 767-780.
Hunt, D, (1983). Farm power and machinery management 8 th Ed., Iowa state Univ., Ames, U. S. A.
Imara Z. M.;Kh. A. A. Khadr; W. M. Mechail and A. O. M. Arif (2003). Effect of different planting and harvesting methods on wheat production Misr J. Agr. Eng. 20(1): 115-128. | ||||
Statistics Article View: 147 PDF Download: 189 |
||||