Evaluation of the dynamic mechanical analysis, water absorption and chemical resistance properties of sulfur/epoxy composites | ||||
Egyptian Journal of Chemistry | ||||
Article 11, Volume 64, Issue 1, January 2021, Page 107-115 PDF (1.28 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/ejchem.2020.35160.2729 | ||||
View on SCiNiTO | ||||
Authors | ||||
Mohammed Eldesouki 1; Zeinab abo-shanab 2; Mohammed Mohammedy3; Mohamed Elshafie4; Mohamed Abo Riya5; Sanaa Elkholy6 | ||||
11 Ahmed El-Zomor Street, El Zohour Region - Nasr city - Cairo | ||||
2Petroleum Applications Department, Egyptian Petroleum Research Institute (EPRI), Cairo, Egypt. | ||||
3bPetroleum Application Department,Egyptian Petroleum Research Institute,Cairo11727,Egypt | ||||
4Petroleum applications department, Egyptian Petroleum Research Institute (EPRI), Cairo, Egypt. | ||||
5Chemistry department, faculty of science, benha university, benha | ||||
6Petroleum Applications department, Egyptian Petroleum Research Institute, Cairo, Egypt | ||||
Abstract | ||||
Modified epoxy composites have become attractive materials for various applications including coatings, polymer concrete, and with asphalt as steel bridge pavement material. In such applications, it is important to maintain high chemical and mechanical resistance to avoid load cracking and corrosion resulted from chemicals exposures. The purpose of this study is to produce sulfur/epoxy composites with excellent mechanical and chemical properties and able to be applied easily in a wide range of applications. the epoxy resin was mechanically mixed with different percentages of sulfur and linseed oil to form sulfur/epoxy composites. Where sulfur is well incorporated into the epoxy matrix. The prepared composites were characterized by dynamic mechanical analysis including storage modulus, loss modulus, and tan delta. In addition, the chemical and water absorption resistance was tested including two hours boiling water absorptance resistance and long-term water absorptance resistance. the results showed enhanced storage modulus, glass transition temperature, chemicals, and water absorption resistance. Also, it is observed that as the concentration of sulfur increases, the mechanical and chemical resistance properties increase. | ||||
Keywords | ||||
additives; adhesion; blends; coatings; plastics | ||||
Statistics Article View: 744 PDF Download: 534 |
||||