DEVELOPMENT OF A VACUUM PRECISION SEEDER PROTOTYPE FOR ONION SEEDS | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 7, Volume 26, Issue 4, October 2009, Page 1751-1775 PDF (273.42 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2009.107381 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| UA Shaaban1; M T Afify2; G E Hassan3; ZA El-Haddad4 | ||||
| 1Graduate Student, Dept. of Agric. Eng. Moshtohor, Benha Uni., Egypt. | ||||
| 2Lecturer, Dept. of Agric. Eng. Moshtohor, Benha Uni., Egypt. | ||||
| 3Director of The Agric. Eng. Res. Institute, ARC,Dokki , Giza , Egypt | ||||
| 4Professor, Dept. of Agric. Eng. Moshtohor, Benha Uni., Egypt | ||||
| Abstract | ||||
| The purpose of this study was to develop, construct and test a vacuum precision seeder prototype suitable for onion seeds. The developed prototype was fabricated from local materials (Stainless Steel 304). It was also designed to plant two rows with 70 mm apart instead of one row as the most onion vacuum seeders in the market. Tests were conducted at an indoor soil bin facility under different operational parameters. These parameters were three seed plates with different hole diameters (0.8, 1.0 and 1.2 mm), four levels of disc speeds (peripheral velocity of seed plate) (0.08 (7.3), 0.14 (12.5), 0.21 (18.7) and 0.28 m/s (24.4-rpm)), four levels of blower speeds (4000, 4500, 5000 and 5500-rpm) and three level of forward speeds (2.7, 3.6 and 5.3 km/h). Measurements were taken for the actual seed spacing, seed miss index, seed multiple index, quality of feed index, precision in spacing and the vacuum pressure in the hole. Results indicated that the optimum values of the actual seed spacing (5.93 mm), seed miss index (8.1%), seed multiple index (8.12%), quality of feed index (83.7%), precision in spacing (23.4%) and the vacuum pressure in the hole (4.75 kPa.) were obtained with the seed plate of 1.0 mm hole diameter. Results of statistical analysis showed that the most desirable conditions in terms of operating developed prototype were obtained with the seed plate of 1.0 mm hole diameter at 0.21 m/s (18.7-rpm) disc speed, 4500-rpm blower speed and at 3.6 km/h forward speed. It also indicated that there was no appreciable difference between the two rows of the developed prototype under different operational conditions. | ||||
| References | ||||
|
Shaaban Y A (2009). Development of an appropriate pneumatic planter for small holding in Egypt. Unpublished Ph. D. Thesis. College of Agric, Benha Uni.
Barut Z B; Ozmerzi A (2004). Effect of different operating parameters on seed holding in the single seed metering unit of a pneumatic planter. Turk. J. Agric., (28): 435-441.
Bosoi, E.S., Verniaev, O. V.; Smirnov, l. l., and Sultan-Shakh, E. G., 1987, Agricultural machines, theory, construction and calculations, Vol. 1, Oxionian Press Pvt. Ltd., New Delhi : 237-275.
Bracy R P; Parish R L (1998). Seeding uniformity of precision seeders. Horticultural Technology, 8(2):182-185.
Chhinnan M S; Young J H; Rohrbach R P (1975). Accuracy of seed spacing in peanut planting, Transactions of the ASAE,18(1):828-831.
El-Sahrigi A F (1985). Socico-economic evaluation of farm machinery introduced in project villages from 1980 to 1984. Working paper No (19). Ministry of Agriculture, Cvacuumo, Egypt.
El-Shal M S (1987). A Study on the usability of pneumatic planters under Egyptian prevailing conditions. Egypt. J. App. Second Issue June (2), 1987. 511-520.
Giannini G R; Chancellor W J; Garrett R E (1967). Precision planter using vacuum for seed pickup. Transactions of the ASAE, 10 (5): 607-750.
Kachman S D; Smith J A (1995). Alternative measures of accuracy in plant spacing for planters using single seed metering. Trans. of the ASAE, 38(2): 379-387.
Karayel D; Ozmerzi A (2001). Effect of forward speed and seed spacing on seeding uniformity of a precision vacuum metering unit for melon and cucumber seeds. Journal of the Faculty of Agriculture, 14(2): 63-67.
Karayel D; Barut Z B; Ozmerzi A (2004). Mathematical modeling of vacuum pressure on a precision seeder. Biosystems Engineering 87 (4), 437-444
Lan Y; Kocher M F; Smith J A (1999).Opto-electronic sensor system for laboratory measurement of planter seed spacing with small seeds. Journal of Agricultural Engineering Research,72(1):1 19-127.
Onal I (1987). Sowing-planting-fertilizing machineries. Ege University, Agriculture Faculty Publication No. 490.pp. 372.(EU Agriculture Faculty Press: Izmir, Turkey.
Parish R L; Bracy R P; McCoy J E (1991). High-density planting in a precision cultural system for vegetable production. Horticultural Technology, 1(1): 54-58.
Singh R C; Singh G; Saraswat D C (2005). Optimization of design and operational parameters of a pneumatic seed metering deice for planting cottonseeds. Bio-systems Engineering, 92(4): 429-433.
Srivastava A K; Goering C E; Rohrbach R P (1993). Engineering Principals of Agricultural Machines. ASAE Textbook Number 6. Pamela De Vore-Hansen, Editor Information Publishing Group, USA. pp: (235).
Soos P; Sziile Z S; Fiizy J (1989). A comparative evaluation of modern sugar beet drills. Bulletin of the University of Agricultural Science, Godollo, 1, 166-170.
Wanjura D F; Hudspeth E B (1969). Performance of vacuum wheels metering individual cottonseed. Transactions of the ASAE, 12(6): 775-777. | ||||
|
Statistics Article View: 897 PDF Download: 354 |
||||
