DEVELOPMENT AND TEST ATTACHMENTS TO THE TANGENTIAL FLOW THRESHER TO SUIT CARAWAY CROP THRESHING | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 2, Volume 26, Issue 3, July 2009, Page 1068-1080 PDF (245.4 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2009.107752 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| G.G Radwan; R.G. Salim; A.S. Al-Ashry | ||||
| Agric. Eng. Res. Inst. Dokki, Giza, Egypt. | ||||
| Abstract | ||||
| The aim of this work is to develop and construct attachments to the local thresher to study the feasibility of using local cereal threshing machine for threshing caraway crop. The auxiliary parts attached to the thresher may maximize thresher exploitation. The thresher with attachments was tested at different operating conditions, at rotor speeds (500, 560, 630, and 700 rpm, moisture contents of caraway straw 10.36, 11.84 and 13.72 %. Air speeds on sieves (4.8, 5.7 and 6.8 m/s) were also tested. Some of factors were fixed such as, hole diameter of sieves was 3 mm, feed rate was 540 kg/h and concave clearance was 15 mm. The experiments were carried out in north Egypt (Tafhna - El-Azab, Zefta, Garbia governorate) during the winter season of 2007 on Caraway crop. The obtained results show the local threshing machine can be successfully used for threshing caraway under the following conditions: seed moisture content of 11.84 %, drum speed of 500 rpm and air speed of 4.8 m/s resulting seed losses of 2.2 %, threshing efficiency of 73.7 %, and criterion energy consumed 29.04 kW.h/ton. | ||||
| References | ||||
|
Awady, M. N., I. Yehia, M. T. Ebaid, and E. M. Arif, ( 2003 ). Development and theory of rice cleaner to reduce impurities and losses. Misr J. Agric. Eng., 20 ( 4 ): 53 - 68 . Bansal, N. K. and Dahiya. B. S. (2001). Effect of threshing techniques on quality of sunflower seed. J of Indian Seed Research. 29(1): 52-57. Chandrakanthappa, Kammar, Batagurki, S. B. and Kammar. C. (2001). Evaluation of different threshing methods for primary processing of finger millet. Mysore J of Agric. Sci. 35(2): 128-132. El-Behery A. A.; I. S. E. Yousef; S. A. F. El-Kady (2000) " Studies on flax threshing using a local paddy thresher" Egyptian J. of Agric. Res., Vol. 78 No. 1 pp. 489-497. Embaby, A. T. (1985) "A comparison of different mechanization system for cereal crop production" M. Sc. Thesis, (Ag. Eng.,) Cairo Univ. Johnson, R. (2003) " Setting threshers for harvesting best quality seed and field corn" Director, cooperative Extension service, Iowa state Univ. of science and Technology, Ames. Iowa, file: Engin.2-2. Chandrakanthappa, Kammar, Batagurki, S. B. and Kammar. C. (2001). Evaluation of different threshing methods for primary processing of finger millet. Mysore J of Agric. Sci. 35(2): 128-132. Metwalli, M.; M. M. Ismaeal and A. A. Nada(2003) " Energy consumption to harvest one ton of wheat in newly land" Misr J. Agric. Eng. 15-16 (3) pp. 867-876. Omar, A. E. (1995).Mechanization of pea crop production .M. Sac. Thesis, Agric. Eng.Dept. Fac.of Agric., Zagazig Univ. Tsujimoto T. and Sakurai (2006) "Research on the Development of Applicable Agricultural Machines for Small-scale Farmers in Africa (Part 2)-Case Study of Improvement and Trial-made of Turkish Thresher" Journal of the Japanese Society of Agricultural Machinery, VOL.68;NO.4;PAGE.65-71 | ||||
|
Statistics Article View: 127 PDF Download: 178 |
||||
