PERFORMANCE EVALUATION OF A MECHANISM FOR GREEN ONION HANDLING | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 32, Volume 26, Issue 3, July 2009, Page 1569-1585 PDF (331.72 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2009.108757 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M. A. Mayhoub1; E. A. El-Sahhar1; A. G. El-Kabany1; A. A. Abdel-Hafez2 | ||||
| 1Ag. Eng. Department, Faculty of Agriculture, Ain Shams University, Egypt. | ||||
| 2Horticulture Department, Faculty of Agriculture, Ain Shams University, Egypt. | ||||
| Abstract | ||||
| The objectives of this study were to design and evaluation performance of mechanism for green onion crop handling, as well as, improving the crop quality based on the suggested handling system. However, the suggested handling system consists of feeding unit, trimming unit which based on rotary cutting mechanism, antioxidant unit and tying unit. The following technical parameters had been considered to evaluate the suggesting mechanism: feeding belt speed, feeding rate, cutting disc speed, tying position of onion bundle relative to the cutting disc, angle of cutting disc and discharge rate of ascorbic acid. However, the following technical indicators had been estimated such as machine productivity, trimming efficiency, cutting offset angle of plants, the quality of the final product and the costs of green onion produced by mechanism system. Results indicated that the machine productivity was found to be 316.2 kg/h, handling system efficiency was 75.89 %, the trimming efficiency was 89.15 %, cutting offset angle of plants was 22º, at 12.5 cm/s feeding-belt speed and when 5.6 kg/min feeding rate. With operated at 5.11 m/s cutting disc speed, the optimum tying position during trimming process is 7.5 cm, the wilting coefficient was (0.09 mm/day) at discharge rate of 5 l/h and handling machine reduced the cost of green onion trimming to 1: 2.67 as compared with manual method. | ||||
| Keywords | ||||
| Postharvest; Handling processes; Cutting operation; Trimming operation; Cutting efficiency | ||||
| References | ||||
|
Awady, M. N. (1978). Tractors and farm machinery. Txt. Bk. Col. Ain Shams U., P: 164-167.
E.A.S., 2004 and 2006, Economic Affairs Sector Ministry of Agric. and Land Reclamation, Agriculture Statistics.
Habib, R. A.; B. S. Azzam; G. M. Nasr and A. A. Khattab (2001) “The parameters affecting the cutting process performance of agricultural, Misr J. Ag. Eng. Vol. 19 No. (2)
Kanafojski Cz. and T. Karwowski (1976), agricultural machines, theory and construction. Vol. 2, pp. 49, foreign scientific publications.
Kepner, R.A., R.Bainer and E.L. Barger 1982, Principles of farm machinery. Third edition, pp. 315, AVI Publishing Company Inc., West Port, Connecticut, USA.
Mishra, V. K. and T.V. Gamage 2007, Postharvest Handling and Treatments of Fruits and Vegetables, pp 50 and 69, CRC Press.
Sitkei, G. (1986), Mechanics of agricultural materials, pp. 446. Elsevier Science Publishers, Amsterdam.
Takano J. (2004), Medicinal Properties and Health Benefits of Green Onion (Scallion), http://www.pyroenergen.com/articles09/green-onions-scallion.htm
USDA, (2008), Commercial item description onions, green, fresh, ready-to-use. A-A-20190B http://www.ams.usda.gov/AMSv1.0/ getfile? dDoc Name =STELDEV3006931 | ||||
|
Statistics Article View: 103 PDF Download: 155 |
||||
