CONSTRUCTION AND TESTING THE SEED-PUNCH PLANTER | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 3, Volume 26, Issue 2, April 2009, Page 597-607 PDF (267.39 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2009.109073 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Z. E Ismail1; E. H. El-Hanify2 | ||||
| 1Prof., Power Technology and farm machinery, Ag. Eng., Dept. of Mansoura Univ., Egypt. | ||||
| 2Ascocite prof. , Ag. Eng., of For Efficient Productivity, Zagazig Univ. Egypt | ||||
| Abstract | ||||
| This paper describes the specification of requirements and the functionality, of a new mechanism of punch planter system based on small smart machines. The idea of this system is put the seed in soil by punches holes in the soil and drops seeds. The machine is constricted and tested in Mansoura university workshop. The aim of this work is to manufacture and construct the investigated planter, studies the effect of oscillating tube mechanism on the seeds distribution and to determine the factors that realizes the best operation condition. The data were statistically analyzed to determine the effect of the oscillating tube radii and the traveling speed of punch planter under two different of the connecting rod length (150, and 180 mm) on performance indices, namely mean seed spacing, miss index, multiples index, and quality of feed index, precisions in spacing and the amount of seed rate. The optimum parameters were found at punch planter speed of 0.6 m/s and oscillating tube radius of 12cm and connecting tube rod of 180mm. | ||||
| Keywords | ||||
| planter; seed punch; handling planter; single row planting and systems analysis of seed spaces | ||||
| References | ||||
|
ASA Standards (2003). ASAE S358. Determination of Forage Moisture content. St. Joseph, MI: ASAE.
Bahri, A. (1992). Evaluation of opener and press wheel combinations on a no-till grain drill when seeding wheat. M.S. thesis. Lincoln, Nebr.: University of Nebraska
Bracy, R.P.; R.L. Parish and J.E. McCoy (1999). Precision seeder uniformity varies with theoretical spacing. Hort Technology. 9: 1, 47-50.
Erbach, D.C. and T.C. Kaspar (1994) Row cleaners for no-till planting of corn. ASAE Paper No. MC94-1004. St. Joseph, Mich.: ASAE
Fee, R. (1993). Retool for residue: Brushes and tines whisk residue aside. Corn Farmer (Spring): 31-36.
FMO (1981). Fundamentals of Machine Operation. Jonn Deere Company. 26-39.
Ismail Z. E. (2004). The first report of project (Developing the Metering Unite of the Pneumatic Planter) financed by MansouraUniversity researches unite.
Molin, J.P. (2002). Planters, Punch planter, Seed spacing, No-till, Corn. Paper number 021174, 2002 ASAE Annual Meeting . @2002
Molin, J.P.; L.L. Bashford; K. Von Bargen and L.I. Leviticus (1998). Design and evaluation of a punch planter for no-till systems. Transactions of the ASAE 41(2): 307-314.
PAMI (Prairie Agricultural Machinery Institute)-(1984a). Evaluation Report 357. Humboldt, Saskatchewan, Canada.
PAMI (Prairie Agricultural Machinery Institute)- (1984b). Evaluation Report 358. Humboldt, Saskatchewan, Canada.
Schaaf, D.E., S. Hann and B. Rogers (1979). The development of performance data on seed drill furrow openers. ASAE Paper No. 79-1016. St. Joseph, Mich.: ASAE.
Srivastava A. E. (1995). Engineering principles of agricultural machines. ASAE textbook Number 6 Published by the American Society of Agricultural Engineers. Pamela De Vore-Hansen, Editor Books & Journals, June 1995.
Tessier, S.; G.M. Hyde; R.I. Papendick and K.E. Saxton (19910. No-till seeders effects on seed zone properties and wheat emergence. Transactions of the ASAE 34(3): 733-739. | ||||
|
Statistics Article View: 156 PDF Download: 203 |
||||
