A MODIFIED Triangle-SHAPE CHISEL PLOW (EVALUATION AND PERFORMANCE TEST)
El-Iraqi, M., Marey, S., Drees, A. (2009). A MODIFIED Triangle-SHAPE CHISEL PLOW (EVALUATION AND PERFORMANCE TEST). EKB Journal Management System, 26(2), 644-666. doi: 10.21608/mjae.2009.109079
M.E. El-Iraqi; S.A. Marey; A M. Drees. "A MODIFIED Triangle-SHAPE CHISEL PLOW (EVALUATION AND PERFORMANCE TEST)". EKB Journal Management System, 26, 2, 2009, 644-666. doi: 10.21608/mjae.2009.109079
El-Iraqi, M., Marey, S., Drees, A. (2009). 'A MODIFIED Triangle-SHAPE CHISEL PLOW (EVALUATION AND PERFORMANCE TEST)', EKB Journal Management System, 26(2), pp. 644-666. doi: 10.21608/mjae.2009.109079
El-Iraqi, M., Marey, S., Drees, A. A MODIFIED Triangle-SHAPE CHISEL PLOW (EVALUATION AND PERFORMANCE TEST). EKB Journal Management System, 2009; 26(2): 644-666. doi: 10.21608/mjae.2009.109079

A MODIFIED Triangle-SHAPE CHISEL PLOW (EVALUATION AND PERFORMANCE TEST)

Misr Journal of Agricultural Engineering
Article 6, Volume 26, Issue 2, April 2009, Page 644-666  XML PDF (562.22 K)
Document Type: Original Article
DOI: 10.21608/mjae.2009.109079
View on SCiNiTO View on SCiNiTO
Authors
M.E. El-Iraqi1; S.A. Marey2; A M. Drees3
1Senior Researcher, Agric. Eng. Res. Inst., Agric. Res. Center, Egypt.
2Researcher, Agric. Eng. Res. Inst., Agric. Res. Center, Egypt.
3Lecturer, Agric. Eng. Dept., Al-Azher Univ., Assiute, Egypt
Abstract
The main objective of this investigation is to rearrange the tines of  chisel plow as D-shape to reduce draft force required for plowing and to avoid jamming of soil clods and crop residues which frequently occurred when using the common chisel plow of tines arranged in 2 rows. The performance of  the modified D-shape chisel plow was evaluated compared to other 2 and 3 rows of chisel plow. The performance tests were carried out at two different pervious crops of experimental field with three levels of soil moisture content (25.20, 20.25 and 17.30% for rice field and 20.77, 16.92 and 14.38% for soya bean field). Two different levels of plowing depth (10 and 20 cm) were included in the tests. The obtained results indicated that:

The lowest values of draft force and the highest values of field capacity were recorded with the modified D-shape chisel plow (4 rows) compared with other shapes of chisel plow (2 and 3 rows) at any given study parameters. Meanwhile, the highest values of draft force and the lowest values of field capacity were obtained with 2 rows chisel plow.
Using the modified 4 rows chisel plow saved about 23 up to 59% in the power consumption and about 30 up to 58% in the energy requirements compared with other shapes of chisel plow (2 & 3 rows) at any given study parameters, in addition to obtain highest degree of plowing quality.
It is recommended to locally fabricate and operate the modified D-shape chisel plow (4 rows) for the Nile delta soil conditions. This modification may be develop the production of chisel plow to be more suitable for agricultural business in Egypt, especially the Egyptian government encourages and facilitate the local manufacture to move the country import dependency to self sufficient. Where, the local manufacturing still making similar copy from imported one without standardization.
References
Abd El-WAhab, M.K.(1994). Minimum tillage by a simple combination.Misr J. Agric. Eng. 11(1): 711-724.

Al-Janobi, A.A. and M.F. Wahby (1998). Energy consumption for some tillage and planting systems. Arab Universities Journal of Agric. Sciences, Riyadh, Saudi Arabia, 6 (1): 37-48.

ASAE, Engineering Practice 2191.1(1985). Terminology and definition for soil tillage and soil tool. ASAE Standards. Philadelphia, USA, Vo, 3.

Awady, M. N. (2001). Agricultural machinery, Txt, Bk., Col. Ag., Ain-ShamsUniv.: 160 p. (in Arabic).  

Backingham, F. (1984). Fundamental machine operation. John Deere Co. Illinois.

Baloch, J.M.; A.N. Mirani and S. Bukhari (1991). Prediction of field performance of wheel tractors. AMA, 22 (4): 21-24.

Black, C.A.; D.D. Evan; J.L. White; L.E. Ensimenger and F.E. Clark, (1965). Methods of soil analysis (part1), Physical and mineralogical properties, including statistics of measurements and sampling, American Society of Agronomy, Inc., Pub. Madison, Wisc., U.S.A.: 375-377 and 552-557.

Bowers,C.G.(1989).Tillage draft and energy measurements for twelve southeastern soil series. Transaction of ASAE Vol. 32(5) 1492-1502.

Chandon, K. and R.L. Kushwaha (2002). Soil forces on deep tillage tools. The AIC 2002 Meeting CSAE/SCGR program Saskatoon, Saskatchewan, July 14-17. (2002).

Cravence, V.; L. Emil; J. Cuza and F. Mihai (1976). The guide of the agricultural Mechanization Engineer. Handbook, Ministry of Agricultural and Food Industries, Bucharest, Romania, PP. 108.

El- Raie, A.E.; G.E. Nasr and W.M. Adawy (1993). A study on the effect of different systems of tillage on physical properties of soil; Misr J. Agric. Eng., 10 (2): April.

El-Nakib, A.A. and H.A. Fouad. (1990). Effect of minimum tillage with conditioner implement on soil physical properties. Misr J. Agric. Eng 7(2): 121-131.

El-Sahrigi; A.F. and C.S. Sheply (1985). Socio-economic evaluation of farm machinery, Egyptian Agric. Mechanization project Ministry of Agric. Egypt.

El-Sayed, A.S. and F.S. Ismail (1994). Effect of different tillage techniques on some soil properties & cotton yield. Misr J. Agric. Eng., 11(4): 922-941.

Grisso, R.D.; M.Yasin and M.F. Kocher (1996). Tillage implement force operating in silty clay loam. Trans. of the ASAE, 39 (6):1977-1983.

Gvrbachan, S. and S. Singh, (1986). Optimum energy for tillage soil. Reiaercb Elsevier science publishers BV Amsterdam 205-245.

Helmy, M. A. (1980). Theoretical and experimental contributions for determination of the constructional and operational parameters of some tillage implements in Alluvial oil. Unpubl. Ph.D. Thesis. Bucharest Univ., Romania.

Helmy, M.A.; S.M. Gomaa; H.M. Sorour and HA. EL-Khteeb (2001). Effect of some different seedbed preparation systems on irrigation water consumption and corn yield. Misr J. Agric. Eng., 18 (1) ; 169-181.

Hunt, D. (1983). Farm power machinery management. English Edition. Iowa state Univ. Pres. Ames. pp. 3-6.

Iqbal, M.; M. Younis; M.S. Sabir and A.H. Azhar (1994). Draft requirements of selected tillage implements. AMA 25 (1):13-15.

Kepner, R.A., R Bainer and E.L. Barger. (1978). Principles of farm machinery. 3rd edition, AVI Pub. Co., Inc. West port, Conn. U.S.A. P:186.

Khalilian, A; T.H. Garner; H.L. Musen; R.B. Dodd and S.A. Hale. (1988). Energy of conservation tillage in coastal plain soils, ASAE, 31(5): 1333-1338.

Kirisci, V. A. (1994). A field method for predicting the draught forces of tillage implements. PhD thesis. SilsoeCollege of CranfieldUniversity, Silsoe, Bedford.

Metwaly,  E.M.M. (1999). Effect of plowing on some soil characteristics and yield  for wheat and faba-bean in new reclaimed soil. The 7th conf. of Misr Society of Agric. Eng., 27-28 Oct. 1999: 162-174.

Mouazen, A.M and H. Ramon (2002). A numerical-statistical hybrid modeling scheme for evaluation of draught requirements of a subsoiler cutting a sandy loam soil, as affected by moisture content, bulk density and depth. Soil & Tillage Res., 63 (3-4):155-165.

Nasr, H.M., G.El. Nasr and A.T. Imbabi (1998). Mechanization of seedbed preparation for sunflower production. Misr J. Agric. Eng., 15 (2): 225-245.

Younis, S.M., M.A. Shaibon and A.M. Zien El-Din (1991). Evaluation of an eleven tillage treatments used for cultivation of bean, wheat and cotton crop in Egyptian silty soil. Misr J. Agric. Eng., 8(1):11-26.

Zein El-Din, A.M. (1985). Co-operative study between different tillage methods. M. Sc. Thesis, Agric. Eng. Dept., Fac. of Agric., Alex. Univ., Egypt.

Statistics
Article View: 207
PDF Download: 267