A COMPUTER MODEL TO PREDICT THE DROPLET SIZE TRAVELING DISTANCE IN NOWIND AND WINDY CONDITIONS FOR DIFFERENT NOZZLE SHAPES
El-Berry, A., Ramadan, M., El-Adl, M., Abdel Mageed, H. (2009). A COMPUTER MODEL TO PREDICT THE DROPLET SIZE TRAVELING DISTANCE IN NOWIND AND WINDY CONDITIONS FOR DIFFERENT NOZZLE SHAPES. EKB Journal Management System, 26(1), 185-207. doi: 10.21608/mjae.2009.109870
A. M. El-Berry; M. H. Ramadan; M. A. El-Adl; H. M. Abdel Mageed. "A COMPUTER MODEL TO PREDICT THE DROPLET SIZE TRAVELING DISTANCE IN NOWIND AND WINDY CONDITIONS FOR DIFFERENT NOZZLE SHAPES". EKB Journal Management System, 26, 1, 2009, 185-207. doi: 10.21608/mjae.2009.109870
El-Berry, A., Ramadan, M., El-Adl, M., Abdel Mageed, H. (2009). 'A COMPUTER MODEL TO PREDICT THE DROPLET SIZE TRAVELING DISTANCE IN NOWIND AND WINDY CONDITIONS FOR DIFFERENT NOZZLE SHAPES', EKB Journal Management System, 26(1), pp. 185-207. doi: 10.21608/mjae.2009.109870
El-Berry, A., Ramadan, M., El-Adl, M., Abdel Mageed, H. A COMPUTER MODEL TO PREDICT THE DROPLET SIZE TRAVELING DISTANCE IN NOWIND AND WINDY CONDITIONS FOR DIFFERENT NOZZLE SHAPES. EKB Journal Management System, 2009; 26(1): 185-207. doi: 10.21608/mjae.2009.109870

A COMPUTER MODEL TO PREDICT THE DROPLET SIZE TRAVELING DISTANCE IN NOWIND AND WINDY CONDITIONS FOR DIFFERENT NOZZLE SHAPES

Misr Journal of Agricultural Engineering
Article 11, Volume 26, Issue 1, January 2009, Page 185-207  XML PDF (540.79 K)
Document Type: Original Article
DOI: 10.21608/mjae.2009.109870
View on SCiNiTO View on SCiNiTO
Authors
A. M. El-Berry1; M. H. Ramadan2; M. A. El-Adl2; H. M. Abdel Mageed3
1Prof. of Agric. Eng., Dept. of Agric. Eng. , Faculty of Agriculture, Cairo University, Egypt.
2Assoc. Prof. of Agric. Eng. Dept. of Agric. Eng., Faculty of Agriculture, Al-Mansoura University, Egypt.
3Agric. Res. Ins., Alexandria Branch, Alexandria, Egypt.
Abstract
A finite difference numerical model was developed to determine the mean droplet size diameter at any distance from a sprinkler as a function of nozzle shape, size and pressure.  Droplet size data from square, rectangle, triangle and circle nozzle orifice shapes verified the model.  Data for model prediction were generated throughout lab experiments. Nozzle pressure and shape had a major influence on droplet size. Higher pressure promoted smaller droplets over the entire application profile. Noncircular nozzles had a large droplet size at the same distance from sprinkler but circular nozzle had the largest droplet size near the perimeter.
Keywords
sprinkler irrigation; nozzle shape; droplet size; modeling
References
ASABE Standards 2006. Standards Engineering Practices Data. Procedure for sprinkler testing and performance reporting. S398.1. PP 933-935.Adopted and published by the American Society of Agricultural and Biological Engineers. 53rd. Edition. ASABE, St.Joseph, MI, USA.

Awady, M. N. 1978. An atomization theory forswirl nozzles, Trans. of the ASAE 21 (1): 70-74.  

Chen, D.and W. W. Wallender. 1985. Droplet size distribution and water application with low-pressure sprinklers.  Trans. of the ASAE 28 (2): 511-516.

 Hills, D.J. and Yuping Gu, 1989.  Sprinkler volume mean droplet diameter as a function of pressure. Trans. of the ASAE 32 (2): 471-476.

Forst, K.R. and H.C. Schwalen 1960. Evapotranspiration sprinkler irrigation. Trans. of the ASAE 3 (1): 18-20.24.

Gregory,J.M. and C.B. Fedler, 1986. Model evaluation and research verification (MERV). ASAE Paper No. 86-5032.

Heernann, D.F. and R.A. Kohl, 1981. Fluid dynamics of sprinkler systems. P: 583-618 Cited from Design and operation of farm irrigation systems. 859 P. Ed. M. E. Jensen. An ASAE Monograph, No.3, ASAE, 2950 Niles Rd. St. JosephMI, USA.

James L.G. and Blair S.K. 1984. Performance of low pressure center pivot systems. Trans. of the ASAE 27(6):1753-1757.

Jiusheng Li and Hiroshi Kawano, 1995.  Simulating water-droplet movement from noncircular sprinkler nozzles.  J. Irrig. Drain. Div. ASCE 121 (2): 152-185.

Jiusheng Li,  1997.  Effect of pressure and nozzle shape on the characteristics of sprinkler droplet spectra.  J. Agric. Eng. Research, Vol. 66, no. 1: 15-21.

Kohl, R. A.  1974 . Droplet size distribution from medium-size agricultural sprinklers. Trans. of the ASAE 17 (4): 690-693.

Larry G. james 1988. Principles of farm irrigation system design. 541: P. 192,197.

Maheshwari, B. L. and T. A. Mcmahon, 1993. Performance evaluation of border irrigation models for south-east Australia: Part I, Advance and Recession characteristics. J. of Ag. Eng. Res. 54: 67-87.

Nash, J.E. and J.V. Sutcliffe, 1970. River flow forecasting through conceptual models. I.A. discussion of principles. J. of Hydrology, 10: 282-324.

Richards, P. J. and E.K. Weatherhead. 1993. Prediction of rain gun application patterns in windy conditions. J. Agric. Eng. Research 54(4):  281-291

Seginer, I. 1965. Tangential velocity of sprinkler drops. Trans. of the ASAE 3 (1): 90-93.

Seginer, I. 1971. Water losses during sprinkling. Trans. of the ASAE 14 (4): 656- 659, 664.

Sharaf, G.A. 2003. Evaluation of pressure distribution and lateral flow rates along drip tape lateral. J. Agric. Eng., Research 20(2):  542-556.

Zin El-Abedin, T. K. and S. M. Ismail, 1999. Estimation and analysis of water advance in surface irrigation. Misr J. Ag. Eng., 16 (4): 720-744.

Statistics
Article View: 93
PDF Download: 135