DEVELOPMENT OF A LOCAL MACHINE FOR WINNOWING AND GRADING FLAX SEEDS | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 18, Volume 26, Issue 1, January 2009, Page 343-358 PDF (382.21 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2020.110151 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| G. K. Arafa1; M.T. Ebaid2; H. A. El-Gendy2 | ||||
| 1Senior Research, Agric. Eng. Res. Inst., Agric. Res. Center, Giza, Dokki, Egypt | ||||
| 2Research, Agric. Eng. Res. Inst., Agric. Res. Center, Giza, Dokki, Egypt | ||||
| Abstract | ||||
| The aim of this investigation is to improve seed cleaner for better clean and grade by using physical and mechanical properties of flax seeds (Sakha 2 -variety). The developed machine was constructed and tested at a private workshop in Kalubia Governorate to clean and grad flax seeds. The performance of the cleaning and grading machine was carried out to investigate some engineering parameters such as: three different feed rates of 1000, 1200 and 1400 kg/h., four different mesh hole sizes of 0.5, 1.1, 2.5 and 3.0 mm and four different vibration frequencies of 40, 70, 100 and 130 Hz. physical and mechanical properties of fax seeds under study, purity and grading efficiency were studied to evaluate the performance of developed cleaning and grading machine. The main results in the present study can be summarized as follows:- - Physical properties of flax seeds: length (L), width (W), and thickness (T) were 4.38, 2.2, and 0.72 mm, respectively , volume (V) 3.631 mm3, geometric diameter (Dg) 1.906 mm, arithmetic diameter (Da) 2.44 mm, percentage of sphericity (S) 43.52 %, bulk density (Bd) 0.640 kg/m3, flat surface area (Af)7.56 mm2 transverse surface area (At) 1.24mm2 mass of 1000-seeds (Km)10 g and optimum moisture content (M.C) of 12.5 % for flax seeds . - Mechanical properties of flax seeds: the friction angle (Ψ) between stainless, metal and wood surface and flax seeds was 22, 34, and 40 degree, respectively, coefficient of friction for stainless, metal, and wood surface was 0.404, 0.675, and 0.839, respectively, the angle of repose (θ)was 30 degree, the terminal velocity (Tv) value to suspended flax grain (Sakha 2 – variety) was 22 m/s. and hardness of flax seeds was11.02 N. _ The higher seed purity was 99.33 % and higher grading efficiency was 99.69 % were reached using vibration frequency of 130 Hz, mesh hole size of 3 mm, feed rate of 1400 kg/h and moisture content of 12.5 %. | ||||
| References | ||||
|
Abd El-Ghany, H. M. (2001); Developing a thresher machine for oil crops. Ms. C., Fac. Of Ag., Ain Shams U., Egypt.: 66 p.
Amin, E. E. A. (2003); Effect of some physical and mechanical properties on grading efficiency, the 11th Annual Conference of Misr Society of Agr. Eng. Oct. 2003 :;451-470.
Awady, M. N., and A. S. Sayed, (1994); Separation of peanuts seeds by air stream, MSAE., 11 (1) : 137-147.
El-Gayar, S. M. (2005); Flax seeds cleaning and grading using vibratory apparatus. Misr.J. Ag. Eng., 22(3) : 923-942.EL-Ashary A.S., A.EL-Rayes, and G.R.Gamea (2003); A comparative study of Flax threshing systems and their efects on yield components quality. Misr.J. Ag. Eng., 20(3) : 691-701.El-Raie; A.E.S.; N. A. Hendawy and A.Z. Taib, (1996); Study of physical and engineering properties for some agricultural products. Misr. J. Ag. Eng., 13 (1) : 211-226.
Harmond, J. E.; N. R. Brandenburg, and A.J. Louisa, (1965); Physical properties of seed, Trans. Of ASAE., 8 (1) :30-32.
Mohsenin, N. N., (1986); Physical Properties of Plant and Animal Materials, Gordon and Breach Sc. Pub., N. Y. pp. 734.
Nigrini, O C., K. Spilman, Y. J. Wang, D. S. Chung, and Posner (1994); Evaluation of laboratory grain cleaning and separating equpmint. Part II Trans. of the ASAE. 37 (6):1913-1918.
Soliman, N.S. (1994); Effect of moisture content on angle of repose of paddy rice and its products. Misr.J. Ag. Eng. 11(1): 163-173.
Statistical Year book (2003); M. of Agriculture and land Reclamation (in Arabic) : 3-20. | ||||
|
Statistics Article View: 214 PDF Download: 269 |
||||
