PHYSICAL CHARACTERISTICS AND CHEMICAL PROPERTIES OF POTATO TUBERS UNDER DIFFERENT STORAGE SYSTEMS | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 20, Volume 26, Issue 1, January 2009, Page 385-408 PDF (533.1 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2020.110155 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| G. R. Gamea1; M.A. Abd El-Maksoud1; A.M. Abd El-Gawad2 | ||||
| 1Assoc. Prof. of Ag. Eng. Dep. Fac. Of Ag. Menoufiya U., Egypt. | ||||
| 2Eng. of Ag. Eng. Res. Center, Egypt. | ||||
| Abstract | ||||
| Physical characteristics and some major chemical properties of potato tubers (Diamond and Santana varieties) at fresh, cured and stored in two storage systems stages were investigated. Nawalla traditional storage system at 16+3oC; 84% relative humidity and Cold storage system at 4oC; 90 RH were used in the investigation. The storage period after curing stage was 75 days. This period was divided into 3 sub periods every 25 days. Physical characteristics included physical dimensions, shape, weight analysis, actual and calculated volumes, particle and bulk densities, , surface area, particle density, repose angle, static coefficient of friction on different surfaces (rubber, steel and wood), firmness, penetration resistance, impact height and the percentage of bruised tubers due to free falling on steel. While, chemical properties included the changes of moisture content and sugar concentration of tubers. Statistical and regression analysis were conducted to the obtained data. | ||||
| References | ||||
|
Abdel-Mageed, H.N.and H.E., abd Alla, 1994. A simple machine for grading fresh tomatoes. J.Agric. Sci., MansouraUniv., 19 (9): 3033- 3047.
Alhamdan, A.M., B.H, Hassan and A.M. El onsari (2003). Prediction of some engineering properties of four Saudi dates cultivars. Misr J. Ag. Eng., 20 (4): 183 – 192.
ASAE standards (1998). Loads exerted by Irish potatoes in shallow bulk storage structures. ANSI/ASAE EP 446.2 DEC 95.
Boswall P. (2002). Potato shatter bruise test using catechol. Website. Email:prmachail@gov.pr.ca. www.gov.pe.ca/af/agweb
Chen, P.and Z. Sun (1991). A review of non-destructive methods for quality evaluation and sorting of agricultural products. J. agric. Engng. Res. 49:85 – 98.
El-Sahrigi, A.F., (1997). Principals of Agricultural Food processing Engineering. Aca. Library, El-Dokki, Cairo.
Ibrahim, A.(1992). Design an apparatus suitable for winnowing and separating wheat products from stationary threshers. M.Sc. thesis, Fac. Of Ag., Alex. Univ.
Ismail Z.E., (1991). Potato cultivar, cultivation, harvesting, handling and storage. Dar EL mearef publisher – Alexandria : 23 – 57.
Ismail, Z. E. (1988). Some of the physio- mechanical properties for potato planters. J. Agric. Sci. Mansoura Uni., 13 (4), 2259 - 2270.
Matouk, A.M.; Radwan A.S.; El Kholy M.M. and Awees T.R.(2002) Studying the characteristics and physical properties for some agricultural cerial crops. Research project by Fac. Of Ag.,ManouraUniv. and the Acadimy scientific research – Cairo.
Ministry of Agriculture and Reclamation, 2001- 2004, ArabRepublicEgypt. Affairs sector.
Mohsenin, N.N. (1986). Physical properties of plant and animal materials. Gordon of Breach science publishers, Neaw York.
Rastovski, A. and A. Van (1981). Storage of potatoes: post- harvest behavior, storage practice, handling. Center for agricultural publishing and documentation, Wageningen.
Ryall, L.A. and J.M. Lipton (1983). Handling , transportation and storage of fruits and vegetables. A VI publishing company. INC. Westport, Connecticut. V. second edition vegetables and melons.
Smith, O.(1977). Potatoes; production, storing, processing. The AVI pub. Co., INC. Westport, Connecticut.
Suliman, A.F.; E.Y ghoniem and F.M. Abdou (1999). Some physical and mechanical properties of potato concerning the design of diggers and handling operations. The 7thconference of Misr Soc. Of Ag. Eng : 290 – 301. | ||||
|
Statistics Article View: 468 PDF Download: 418 |
||||
