MECHANICAL AND TRADITIONAL HARVESTING METHODS FOR WHEAT CROP | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 50, Volume 25, Issue 4, October 2008, Page 1094-1111 PDF (325.88 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2008.110172 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| A.I. Moussa | ||||
| Senior Res ., Ag. Eng. Res. Inst . ( AEn.RI) , Egypt . | ||||
| Abstract | ||||
| Three combine harvesters at different service life (Fortschritt E514 {1} has been serving for 25 years – Class {2} has been serving for 15 years and John Deer {3} has been serving for 2 years) were tested and compared to another mechanical method mower than thresher (one thresher has free knives on the threshing drum {1} and the other has fixed knives on the drum {2}) compared to traditional method (sickle than thresher {1}). The mechanical harvesting methods were done at three different field speeds 1.9, 2.7 and 3.9 km/h for mower and combines. Also, three different moisture contents 12.1, 14.34 and 16.58 % were effected on harvesting, threshing unthreshing, damaged grain and total grain losses for the previous machines. The experimental results showed that pre-harvesting losses for Sakha 93 was about 0.51 %. The highest total grain losses for combine 1, 2, 3 and mower were 10.36, 7.19. 3.14 and 3.98 % respectively at field speed 3.9 km/h and grain moisture content 12.1 %. Besides, the highest sickle loss is 2.01 % at moisture content 12.1 %. The highest un-threshing losses were 1.13 and 1.22 % for thresher 1 and 2 respectively at grain moisture content 16.58 %. The highest grain damage were 2.24 and 2.02 % at grain moisture content 12.1 % for thresher 1 and 2 respectively. Harvesting speed 2.7 km/h gave the lowest energy with combine 1, 2 and 3, which were 38.95, 34.76 and 43.61 kW.h/fed respectively. Mechanical method (mower then thresher) consumed about double energy consumed by combine; while, traditional method (sickle then thresher) consume about the same energy with combine. Thresher 2 consumed less energy than thresher 1 that because thresher 2 has free knives on the drum depend on the impact. The highest criterion cost with combine1, 2, 3 and mower are 355.9, 277.59, 177.56 and 158.06 LE/fed respectively at field speed 3.9 km/h, and grain moisture content 12.1 %. * Senior Res ., Ag. Eng. Res. Inst . ( AEn.RI) , Egypt . The highest criterion cost with sickle is 229.65 LE/fed at grain moisture content 12.1 %. The highest criterion cost with thresher 1 and 2 are 225.89 and 223.67 LE/fed respectively at grain moisture content 12.1 %. | ||||
| References | ||||
|
Abd El-Mawla, H. A. 1996. Combine harvesting state of Art. Misr. J. Agric. Eng., 13 (2): 440 – 459.
Awady, M. N.; Ghoniem, E. Y. and Hashish, A. I. 1982. A critical comparison between wheat combine harvesters under Egyptian condition, Ain-Shams Univ. Cal. Ag. Res. Bul. No. 1920: 13 p.
ASAE Standards. 1996 ASAE S495, EP 496.2 and D497.. Agricultural machinery management data. ASAE, St. Joseph, MI
Chancellor, W. J. 1981. Substituting information for energy in agriculture. Transaction ASAE, (5): 802-807.
Embaby, A. T. 1985. A comparison of the different mechanization systems for cereal crop production. M. Sc. Thesis Agric. Eng., Fac. Of Agric., CairoUniv.
Hassen. M. A.; M. M. Morad; M. A. El Shazly and A. Farage. 1994. Study on some operating parameters affecting the performance of combine devices with reference to grain losses. Misr J. of Agri. Eng. Vol. 11 (3): 764-780.
Issakhan, M.I; F.M. Arjan; S. Hussain and M.T. Tnrig. 2005. Effect of soy flour supplementation on mineral and phytate contents of unleavened flat bread. Nutrition Food Science, 163-168.
Kassem. A. S. 1995. Effects of some crop and machine parameters on wheat and barely harvesting losses in Saudi Arabia. Misr J. of Agri. Eng. Vol. 12 (4): 866-880.
Moussa, A. I. 1994. Design, construction and testing of a straw cutting and compressing device integrated within a combine. Ph.D thesis Zagazig Univeresity.
Wang, G.; C. Zoerb and L. G. Hill 1988. A combine separation loss monitor. Trans. of The ASAE, 31 (2): 692 – 694. | ||||
|
Statistics Article View: 297 PDF Download: 342 |
||||
