PERFORMANCE OF ACTIVATED SURFACE AREA OF COMBINED MACRO AND MICRO FIBERS IN CONCRETE | ||||
| JES. Journal of Engineering Sciences | ||||
| Article 5, Volume 34, No 6, November and December 2006, Page 1757-1764 PDF (620.18 K) | ||||
| Document Type: Research Paper | ||||
| DOI: 10.21608/jesaun.2006.111144 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Mahmoud Abo El-Wafa Ahmed* | ||||
| Lecturer, Civil Engineering Department, Faculty of Engineering, South Valley University, Aswan, Egypt | ||||
| Abstract | ||||
| This research is oriented towards concrete reinforced with combinations of macro and micro polypropylene fibers with total volume fractions of about 1.0 percent, so it is most important to understand how the combinations of macro and micro polypropylene fibers behave in the cement composite matrix. Two groups of composite concrete were constructed using combinations of macro and micro polypropylene fibers. The experimental test results show a new interesting parameter to consider - the activated fiber surface area, which appears to be a good indicator of fiber performance. The combinations of macro and micro polypropylene fibers allowed a higher activated surface area of fibers that improve the composite concrete properties which are advantageous in achieving a high ultimate composite strength when compared to its individual fiber. | ||||
| Keywords | ||||
| activated surface area of fibers; combined macro and micro polypropylene fibers; composite concrete properties | ||||
|
Statistics Article View: 81 PDF Download: 223 |
||||
