A Simulink Multi-Band Power System Stabilizer | ||||
JES. Journal of Engineering Sciences | ||||
Article 11, Volume 35, No 2, March and April 2007, Page 489-507 PDF (627.75 K) | ||||
Document Type: Research Paper | ||||
DOI: 10.21608/jesaun.2007.112354 | ||||
View on SCiNiTO | ||||
Author | ||||
Youssef A. Mobarak* | ||||
Electric Engineering Department, High Institute of Energy, South Valley University, Aswan, Egypt | ||||
Abstract | ||||
A Multi-Band Power System Stabilizer (MB-PSS) is developed in this paper to get a moderate phase advance at all frequencies of interest in order to compensate for the inherent lag between the field excitation and the electrical torque induced to ensure robust oscillation damping. Its performance is compared with two conventional power system stabilizers (PSS) used to add damping to the rotor oscillations of the synchronous machine by controlling its excitation currents during disturbances. One of them is fed from acceleration power signal and called (Pa-PSS) and the other is fed from speed deviation signal and called (dω-PSS). Digital time responses simulations of the nonlinear system performance during and after severe disturbances have proved effectiveness of the developed (MBPSS). The (MB-PSS) is found to be more effective than those with (dωPSS) and (Pa-PSS). The (MB-PSS) act very fast to follow transient system conditions and to restore its stability subsequent to severe disturbances. | ||||
Keywords | ||||
Multi-Band Power System Stabilizer; Conventional Power System Stabilizer; Power System Stability; Oscillations Damping | ||||
Statistics Article View: 155 PDF Download: 289 |
||||