ENHANCEMENT OF SWIRL GENERATION IN DIESEL ENGINE CYLINDER BY USING COMBINATIONS OF TWISTED TAP AND GUIDE VANES WITH SHROUDED VALVE | ||||
JES. Journal of Engineering Sciences | ||||
Article 3, Volume 46, No 1, January and February 2018, Page 33-45 PDF (968.4 K) | ||||
Document Type: Research Paper | ||||
DOI: 10.21608/jesaun.2018.114415 | ||||
View on SCiNiTO | ||||
Authors | ||||
Saleh Abo-Elfadl; A. Abd El-Sabor Mohamed | ||||
Depart. of Mechanical Eng., Faculty of Engineering, Assiut University, Egypt, Assuit | ||||
Abstract | ||||
Using of shrouded valve creates high swirl ratio inside the engine cylinder. Moreover, using of swirl generation device in the inlet port can improve this swirl ratio. In this paper, both twisted tap and guide vanes devices inserted in the inlet port are used individually for enhancing the generated swirl by the shrouded valve. In addition, the effect of these combinations on the volumetric efficiency and the turbulent kinetic energy (TKE) is studied. A three-dimensional simulation model based on SST k- ω model was used for predicting the air flow characteristics through the inlet port and the engine cylinder in both intake and compression strokes. The results showed that the using of twisted tap and guide vanes with the shrouded valve combinations increases the swirl ratio by 5.2% and 2%, respectively, at the start of injection. They also increase the TKE by 145% and 86.5% but they decrease the volumetric efficiency by about 3%. | ||||
Keywords | ||||
diesel engine; swirl ratio; shrouded valve; twisted tape; guide vanes | ||||
Statistics Article View: 130 PDF Download: 335 |
||||