THEORETICAL STUDY ON STATIC SHEAR BEHAVIOR OF HIGH STRENGTH CONCRETE BEAMS COMPARED WITH NORMAL STRENGTH CONCRETE BEAMS | ||||
| JES. Journal of Engineering Sciences | ||||
| Article 2, Volume 41, No 5, September and October 2013, Page 1753-1764 PDF (412.27 K) | ||||
| Document Type: Research Paper | ||||
| DOI: 10.21608/jesaun.2013.114904 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Khairy Hassan Abdel Kareem1; Fayez Kaiser Abdel Sayed1; Walaa Shoupk  2
| ||||
| 1Professor of concrete structures, Faculty of Engineering, Assiut University | ||||
| 2Civil Engineer, Ministry of Water resources and Irrigation | ||||
| Abstract | ||||
| The main aim of the present study is to present a comparison between the static shear behavior of high strength concrete beams and normal strength concrete beams. The concrete compressive strength of the beams ranged from 250 to 700 kg/. Sixty reinforced concrete beams were analyzed under two point static loads. The variables were the compressive strength of concrete, shear span-to-depth ratio and shear reinforcement ratio (stirrup spacing S). The effect of each variable on the behavior of the beams is studied separately. The details of the beam specimens, material properties, and instrumentation are described in this paper. The results are presented and discussed and the influence of each design parameter is investigated. Analysis of the results is also compared with different existing approaches. | ||||
| Keywords | ||||
| Normal and High-strength concrete Beams; Shear reinforcement; Spacing of stirrup; Shear span to depth ratio; Cracking and Ultimate shear strength | ||||
|
Statistics Article View: 100 PDF Download: 340 |
||||
