IMPROVING THE MECHANICAL AND DURABILITY PROPERTIES OF CEMENT MORTAR BY NANO TITANIUM | ||||
JES. Journal of Engineering Sciences | ||||
Article 2, Volume 43, No 5, September and October 2015, Page 663-681 PDF (714.67 K) | ||||
Document Type: Research Paper | ||||
DOI: 10.21608/jesaun.2015.115213 | ||||
View on SCiNiTO | ||||
Authors | ||||
Mohamed S. Khalafalla 1; Osama A. Hodhod2; Ihab A. Adam1 | ||||
1Construction Research Institute, NWRC | ||||
2Faculty of Engineering, Cairo University | ||||
Abstract | ||||
Cement Mortar is the primary component of cementitious composites. Therefore, it has almost importance for concrete structures. Cement mortar rendering is usually used as a protective layer for most structural elements. The properties of cement mortar incorporating nano titanium were experimentally studied. Nano titanium is a very fine material, which plays a vital role in filling the pores between crystals. This property can lead to better mechanical and physical properties of cement mortar. The experimental results show that compressive and flexural strength gain of cement mortar improves until the added nano titanium reaches 1% of cement weight by 27% and 6 % respectively. Furthermore, porosity of cement mortar incorporating 1% nano titanium climbs to improvement level of 30% over plain samples. In addition, the results show an increase in the specimen’s density by 5%, over control samples. | ||||
Keywords | ||||
Mortar; Nanotechnology; Nano-TiO2; Compressive strength; Flexure strength; Microstructure; Durability, Porosity, ITZ | ||||
Statistics Article View: 101 PDF Download: 452 |
||||