EFFECT OF INLET AND OUTLET GEOMETRIC SHAPE VARIATIONS OF A PIPE CULVERT ON LOCAL HEAD-LOSSES | ||||
| JES. Journal of Engineering Sciences | ||||
| Article 1, Volume 43, No 6, November and December 2015, Page 807-822 PDF (610.06 K) | ||||
| Document Type: Research Paper | ||||
| DOI: 10.21608/jesaun.2015.115294 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Nassralla T. H. | ||||
| Civil Eng Department, Benha University, Egypt. | ||||
| Abstract | ||||
| This research investigates the losses resulting from the sudden contraction and expansion of a pipe culvert. A four hundred runs were carried out considering various angles and contraction ratios at inlet and outlet of the pipe culvert and downstream submerged ratios with different flow conditions. Results were analyzed and graphically presented. The results indicated that the inlet angle of 15ᵒ with width contraction ratio of (bu/D = 2.33) gives the least values of losses at the transition from a free-surface channel to the pipe culvert. For the transition from a conduit to a free-surface channel, the outlet angle of 60ᵒ with a submerged ratio of (hd/D = 0.20) and the outlet angle of 30ᵒ with submerged ratios of (hd/D=0.4, 0.6 and 0.8) give the least values of losses at width contraction ratio of (bd/D = 2.33).These results agree well with the results obtained from previous studies. | ||||
| Keywords | ||||
| Culvert; Energy Loss; Pipe Entrance; Pipe Exit; Physical Model | ||||
|
Statistics Article View: 106 PDF Download: 278 |
||||
