EFFECT OF CORNER MODIFICATION ON TWO-DIMENSIONAL TURBULENT FLOW AROUND A SQUARE CYLINDER WITH INCIDENCE | ||||
| JES. Journal of Engineering Sciences | ||||
| Article 6, Volume 44, No 1, January and February 2016, Page 91-102 PDF (1.18 MB) | ||||
| Document Type: Research Paper | ||||
| DOI: 10.21608/jesaun.2016.117589 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
I. K. Mohamed; W. A. Aissa 
| ||||
| Mech. Power Dept., Faculty of Energy Engineering, Aswan University, Aswan, Egypt | ||||
| Abstract | ||||
| RNG k- model is used to analyze the aerodynamic performance of an isolated square cylinder with different wind angles, turbulence intensities and corners shapes (sharp, chamfered and rounded). The analysis is made for unsteady two-dimensional turbulent flow. The results are presented in the form of drag coefficient, lift coefficient, RMS lift coefficient and Strouhal number. The present work is compared with previous experiments from published literature and the data gave a qualitative agreement. It is found that drag coefficient, lift coefficient, RMS lift coefficient and Strouhal number are sensitive to angle of incidence, turbulence intensity and corner modification. The average reduction in drag coefficient of square cylinder with modified corners is about 44.5 % for 6.5% turbulence intensity and 41.5 % for 14 % turbulence intensity compared with that of square cylinder with sharp corners. Results indicated that the best fit equation of drag coefficient of sharp corners square cylinder at 45 angle of incidence and 14% turbulence intensity in terms of Reynolds number; ranging from 3.0×104 to 2.825×105, is the second order polynomial equation; Cd = 0.0536×(Re/105)2 - 0.3518×(Re/105) + 2.0128. | ||||
| Keywords | ||||
| Numerical analysis; Aerodynamic forces; Corners shape, 2D turbulent flow | ||||
|
Statistics Article View: 136 PDF Download: 658 |
||||
