CALCULATIONS OF THE CONTROLLER LOAD IN COMPUTER CONTROL NETWORK USING PROBABILITY THEOREM | ||||
JES. Journal of Engineering Sciences | ||||
Article 24, Volume 36, No 6, November and December 2008, Page 1523-1534 PDF (348.54 K) | ||||
Document Type: Research Paper | ||||
DOI: 10.21608/jesaun.2008.119777 | ||||
View on SCiNiTO | ||||
Authors | ||||
M. Z. El-Sadek1; M. A. Abdlwahab2; A. A. Alkosy3; A. M. Hemeida4; S. A. Younies5 | ||||
1Electrical Engineering Department, Assiut University, Assiut, Egypt | ||||
2Electrical Engineering Department, Minia University, Minia, Egypt | ||||
3Electrical Engineering Department, Cairo University, Cairo, Egypt | ||||
4Electrical Engineering Department, Higher Institute of Energy Aswan, Egypt | ||||
5Aswan Hydro Power Plant, Aswan, Egypt | ||||
Abstract | ||||
This paper presents the calculation of the controller load of computer control network in a real system. The Calculation of the controller load is very important in order to aid the designer engineer to choose the suitable capacity of the controller for data size. The probability theorem is used to investigate the process of load calculation. The interpolation technique is used to get the function of the required data for the studied system. The calculated value is compared with the measured value to investigate the reality of the proposed method in calculating the load controller using probability theorem. The comparative study between the measured value and calculated value indicate the efficiency of the proposed technique. | ||||
Keywords | ||||
Distributed Control System; Controller Load; Probability Theorem | ||||
Statistics Article View: 87 PDF Download: 952 |
||||