Integration of Fenton Oxidation with Nano-Graphene Oxide to Eliminate the Hazardous Effect of Chromated/Dyed Tannery Effluents
alashkar, T., Nashy, E., masaoud, R., Haroun, A., youssef, M., mahmoud, A. (2021). Integration of Fenton Oxidation with Nano-Graphene Oxide to Eliminate the Hazardous Effect of Chromated/Dyed Tannery Effluents. EKB Journal Management System, 64(2), 649-660. doi: 10.21608/ejchem.2020.46016.2942
Tarek yasin alashkar; Elshahat Nashy; Ragab ali masaoud; Ahmed Haroun; mohamed adel youssef; amira mahmoud. "Integration of Fenton Oxidation with Nano-Graphene Oxide to Eliminate the Hazardous Effect of Chromated/Dyed Tannery Effluents". EKB Journal Management System, 64, 2, 2021, 649-660. doi: 10.21608/ejchem.2020.46016.2942
alashkar, T., Nashy, E., masaoud, R., Haroun, A., youssef, M., mahmoud, A. (2021). 'Integration of Fenton Oxidation with Nano-Graphene Oxide to Eliminate the Hazardous Effect of Chromated/Dyed Tannery Effluents', EKB Journal Management System, 64(2), pp. 649-660. doi: 10.21608/ejchem.2020.46016.2942
alashkar, T., Nashy, E., masaoud, R., Haroun, A., youssef, M., mahmoud, A. Integration of Fenton Oxidation with Nano-Graphene Oxide to Eliminate the Hazardous Effect of Chromated/Dyed Tannery Effluents. EKB Journal Management System, 2021; 64(2): 649-660. doi: 10.21608/ejchem.2020.46016.2942

Integration of Fenton Oxidation with Nano-Graphene Oxide to Eliminate the Hazardous Effect of Chromated/Dyed Tannery Effluents

Egyptian Journal of Chemistry
Article 9, Volume 64, Issue 2, February 2021, Page 649-660  XML PDF (1.7 MB)
Document Type: Original Article
DOI: 10.21608/ejchem.2020.46016.2942
View on SCiNiTO View on SCiNiTO
Authors
Tarek yasin alashkar1; Elshahat Nashy email orcid 2; Ragab ali masaoudorcid 3; Ahmed Harounorcid 4; mohamed adel youssef5; amira mahmoudorcid 6
1tanning materials and leather, national research centre
2Chemical Industries Res Div, NRC Egypt
3Tanning Materials and Leather Technology Department, national research centre
4National research centre
5Chemistry department, Faculty of science, Helwan University, Cairo, Egypt.
6Chemistry department , Faculty of science, Helwan University, Cairo, Egypt.
Abstract
Effective management of tannery effluent is needed for this time. Tanning industry is one of the worst industries from an environmental point of view, where is the prominent sources of pollution to the aquatic environment. Wet-finishing effluent is the most dangerous step which generate the obnoxious effluent in the tanning industry. The conventional treatments of such waste showed deficiency to coop with the required limits of national regulatory standards. In the present study an advanced oxidation technique based on modification of Fenton reaction combined with high porous nanomaterials was applied as an alternative treatment. Variable doses of H2O2, Fe+2, CaO and pH were investigated to determine the optimum operating conditions. The obtained results indicated a good quality of the treated effluent. Residual concentrations of COD, BOD and TSS were 98.51%, 98.11% and 98.82% removal, respectively. The most obnoxious material (Cr) was highly removed (98.92%). Also, decolorization value (YCOL values) was obtained using Nano GO (99%) and/or active charcoal (88.08 %) with CaO. The residual effect of H2O2 was reduced by MnO2, SnO and Fe powder than sod. thiosulphate. The treated effluent could meet to the National regulatory standard for discharging into the sewerage systems with respect to the studied parameters.
Keywords
Hazardous wastes; wet-finishing effluent; Fenton's oxidation process; conventional treatment; COD; BOD
Statistics
Article View: 423
PDF Download: 512