The Performance of Knitted Fabrics Produced from Cotton/Modal Blended Yarns. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 11, Volume 36, Issue 2, June 2011, Page 1-9 PDF (132.2 K) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.2020.122811 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Sherwet Hussein Abdel Latif El Gholmy  1; A. Badr2
| ||||
| 1Professor of Textile Engineering Department., Faculty of Engineering., Alexandria University., Alexandria., Egypt. | ||||
| 2Textile Engineering Department., Faculty of Engineering., Alexandria University., Egypt. | ||||
| Abstract | ||||
| Both fabric appearance and garment comfort are considered the most important wearing characteristics demanded by consumers during daily life use of garments. For many years, predicting fabric properties have been investigated to evaluate the performance of fabrics during wearing. Therefore, this research work aims to invest the physical and mechanical properties of knitted fabrics using step wise regression to be able to estimate the performance of these fabrics during wear, Four different fabrics with different yarn blends of Egyptian cotton and modal were produced on the same knitting machine. The fabrics were finished by two different techniques the first one in the tubular form (rope form) and the second one in the open width form. Step wise regression was used to estimate the performance of these fabrics during wear. Finally, the desirability function was used to optimize the multiple response properties. The analysis of results shows that the modal is perfect to wear in summer; as it absorbs the sweat easily and allows the air flow due to its high air permeability. | ||||
| Keywords | ||||
| Modal; knitted fabric; finishing method; Step Wise Regression; Desirability function and Radar area | ||||
|
Statistics Article View: 163 PDF Download: 243 |
||||
