OPTIMIZATION OF JIGGING PROCESS USING STATISTICAL TECHNIQUE | ||||
| JES. Journal of Engineering Sciences | ||||
| Article 14, Volume 38, No 3, May and June 2010, Page 807-818 PDF (629.58 K) | ||||
| Document Type: Research Paper | ||||
| DOI: 10.21608/jesaun.2010.124400 | ||||
 View on SCiNiTO | ||||
| Author | ||||
Mahmoud M. Ahmed 
| ||||
| Mining and Metallurgical Engineering Department, Faculty of Engineering, Assiut University, Assiut 71516, Egypt | ||||
| Abstract | ||||
| The jigging studies of a synthetic binary mixture of quartz and coal were carried out. The variables studied were the particle size, bed thickness, number of strokes per minute, and water level. Experiments were carried out using 24 full factorial design. The main and interaction effects on quartz recovery were evaluated using Yates' analysis. The optimum jigging condition was found by the method of steepest ascent. A product with 81.81% quartz and 97.74% recovery in the lower layer was obtained at the following optimum conditions: particle size 3.907 mm, bed thickness 1.87 cm, water level 4.41 cm, and 234.3 strokes per minute. | ||||
| Keywords | ||||
| Harz Jig; Yates' Analysis; Factorial Analysis; Interaction Effect; t-Test | ||||
|
Statistics Article View: 99 PDF Download: 1,089 |
||||
