Nonlinear Modeling of Compression System and Stability with Recirculation. | ||||
MEJ- Mansoura Engineering Journal | ||||
Article 11, Volume 34, Issue 1, March 2009, Page 66-72 PDF (274.7 K) | ||||
Document Type: Research Studies | ||||
DOI: 10.21608/bfemu.2020.125411 | ||||
View on SCiNiTO | ||||
Authors | ||||
Aly El-Zahaby* 1; El-Shenawy Abd-Elhameed2; Zakarya Zyada2; Khaled Sad Eldin2; Mohamed Salem3 | ||||
1Mechanical Power Engineering Department, Tanta University, Tanta, Egypt | ||||
2Mechanical Power Engineering Department, Tanta University, Egypt | ||||
3Mechanical Engineer., Gasco Company, Egypt | ||||
Abstract | ||||
The model of compression system is used for capturing the dynamics of rotating stall and surge. In this paper, we introduce the modeling formulations of compression system after modifying the original work proposed by Moore and Greitzer (1986). Recirculation technique is used to eliminate the instabilities of compression system, where bled air from downstream compressor via bleed valves is re-circulated to injectors upstream of compressor inlet. The form of the modeling takes the four-state low order model which applied to design the 110nlinear controller. The compressor works in stable regime by using recirculation technique. Lyapunov Control Function (LCF) is used to produce optimal control to stabilize the compressor operation by using recirculation technique, whereas simulation results show that it is a good technique. By using recirculation technique bleed valves requirements are reduced. | ||||
Keywords | ||||
Compression system; Compression system modeling with re-circulation; Surge control | ||||
Statistics Article View: 103 PDF Download: 146 |
||||