Axial Load Capacity and Stresses in Combined Loaded Radial Ball Bearings. | ||||
MEJ- Mansoura Engineering Journal | ||||
Article 16, Volume 32, Issue 2, June 2007, Page 13-20 PDF (665.61 K) | ||||
Document Type: Research Studies | ||||
DOI: 10.21608/bfemu.2020.128536 | ||||
View on SCiNiTO | ||||
Authors | ||||
Tawfik Tawfik Mohamad Elmidany* 1; Hassan Saied Mohamad Hedia2; A. Kohail3; M. Elkotb4 | ||||
1Prod. Eng., Faculty of Engineering. Mansoura University, Egypt. | ||||
2Production and Mechanical Design Department., Faculty of Engineering., Mansoura University., Mansoura., Egypt. | ||||
3Specialized Studies Academy, Workers University, Egypt | ||||
4Specialized Studies Academy, Workers University, Egypt. | ||||
Abstract | ||||
An interactive and easy to use simulation tool has been developed to simulate and depict normal loads, contact angle, normal deformations, and stresses at any angular position of the rolling element for combined loaded radial ball bearings. The importance of this work comes from the ability to determine the contact angle and induced normal toad at any angular position. The main objective of this work is to lower stresses within the bearings, consequently, bearing fatigue life which is governed by stress level is significantly affected, showing that the lower the stress level the higher the service lifetime. This work is intended to serve both design and maintenance engineers. | ||||
Keywords | ||||
Ball bearings; Axial load; Bearing stresses; Contact angle | ||||
Statistics Article View: 99 PDF Download: 168 |
||||