Dispersion Effect on the Performance of FO-CDMA Passive Correlator Receiver. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 13, Volume 31, Issue 1, March 2006, Page 17-32 PDF (738.54 K) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.2020.129245 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Kamel Hassan* 1; Atef Ghuniem2; Asmaa Abd Elftah2 | ||||
| 1Electrical Engineering & Computers Dept., Higher Technological Institue, 10th of Ramadan city, Egypt, | ||||
| 2Electrical Engineering Dept., Faculty of Engineering in Port Said, Suez Canal University, Egypt. | ||||
| Abstract | ||||
| In this paper the effect of chromatic dispersion on the performance of fiber optic-code-division-multiple-access (FO-CDMA) passive correlator receiver has been investigated. Optical orthogonal codes (OOCs) are utilized as signature sequences. The major noise sources (quantum shot noise, dark current noise, and Gaussian circuit noise)has been taken into consideration. We have derived an approximate analytical expression for the bit error rate (BER) of the system. BER analysis of the system is performed in the case of three different fiber types which are 1) a standard single mode fiber (SMF), 2) a dispersion shifted fiber (DSF), and 3) a fully dispersion compensated fiber (DCF) assuming a Gaussian pulse shape for the transmitted pulses, The dispersion effect has been checked for different system parameters. The numerical results demonstrate that for a fixed number of simultaneous users "N" ,the dispersion effect increases with increasing the code length "F" .It is found also that increasing code weight "K" leads to minimize the dispersion effect in the standard SMF as long as the power level is kept less than a pre-determined value. | ||||
|
Statistics Article View: 84 PDF Download: 158 |
||||
