An Experimental Investigation into the Effect of Treatment Temperature on the Grain Size of Low Carbon and Microalloyed Steels.
Said, A., El-Hammady, A. (2020). An Experimental Investigation into the Effect of Treatment Temperature on the Grain Size of Low Carbon and Microalloyed Steels.. EKB Journal Management System, 30(1), 24-33. doi: 10.21608/bfemu.2020.130320
Ahmed Said; Alaa El-din El-Hammady. "An Experimental Investigation into the Effect of Treatment Temperature on the Grain Size of Low Carbon and Microalloyed Steels.". EKB Journal Management System, 30, 1, 2020, 24-33. doi: 10.21608/bfemu.2020.130320
Said, A., El-Hammady, A. (2020). 'An Experimental Investigation into the Effect of Treatment Temperature on the Grain Size of Low Carbon and Microalloyed Steels.', EKB Journal Management System, 30(1), pp. 24-33. doi: 10.21608/bfemu.2020.130320
Said, A., El-Hammady, A. An Experimental Investigation into the Effect of Treatment Temperature on the Grain Size of Low Carbon and Microalloyed Steels.. EKB Journal Management System, 2020; 30(1): 24-33. doi: 10.21608/bfemu.2020.130320

An Experimental Investigation into the Effect of Treatment Temperature on the Grain Size of Low Carbon and Microalloyed Steels.

MEJ- Mansoura Engineering Journal
Article 8, Volume 30, Issue 1, March 2005, Page 24-33  XML PDF (528.36 K)
Document Type: Research Studies
DOI: 10.21608/bfemu.2020.130320
View on SCiNiTO View on SCiNiTO
Authors
Ahmed Said* 1; Alaa El-din El-Hammady2
1Menoufia University, Faculty of Eng., Prod. Eng. and Mechanical Design, Shebin El kom, Egypt.
2Tanta University, Faculty of Eng.. Prod. Eng, and Mechanical Design Dept., Tanta. Egypt.'
Abstract
The microstructure of material plays a significant role in its mechanical properties. The influence of grain size on mechanical properties is complex since grain boundaries may either act as obstacles to dislocation motion (strengthening effect) or provide a positive contribution of deformation of the material (softening effect). A series of heat treatment and quenching tests of extra-low carbon, low carbon steels and Nb-V microalloyed steels are conducted. The grain growth behaviour at different high temperatures is investigated. An empirical relation of grain growth behavior has been used to predict the austenitic grain size of the used materials which are subjected to different austenitization treatment temperatures. Experimental results indicate that there is an increase in grain size with temperatures ranging from 900 to 1300 °C Grain size also increases with the reheating time when treated at the same temperature. Comparison of the predicted and experimental grain size at different temperatures is made. It is found that the empirical relation of grain growth behavior gives good agreement it temperature ranges from 1100 to 1300 °C for Nb-v microalloyed steels and extra-low carbon steels, and 900 to 1050 °C for low carbon steels.
Keywords
Heat treatment; phase transformation; grain coarsening accelerated cooling; mechanical properties; microstructure evolution; grain growth modeling
Statistics
Article View: 80
PDF Download: 161