The reactor power effect on the consequences pressure waves after LBLOCA in VVER-1000 | ||||
Arab Journal of Nuclear Sciences and Applications | ||||
Article 2, Volume 54, Issue 1, January 2021, Page 18-27 PDF (1.21 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/ajnsa.2020.27905.1346 | ||||
View on SCiNiTO | ||||
Authors | ||||
DINA AMER 1; Sergey Nikonov 2 | ||||
1Department of theoretical and experimental physics of nuclear reactors, MEPhI, Moscow, Russia | ||||
2NRNU “MEPhI”, Moscow, Russia | ||||
Abstract | ||||
In this paper, the influence of the reactor power behavior on the LBLOCA hydrodynamics at the initial moment of the process (0-1 second) is considered. The calculations are carried out for the first loop in case of the beginning of loading, end of loading and constant power. The parameters of a typical reactor plant V-320 (VVER-1000) were used for the calculation, particularly, the 3rd unit of the Kalinin NPP. All initial data for the calculation were obtained from the materials of the international standard problem Kalinin-3 [1]. The fuel composition and kinetics of the reactor core was considered for the case of the end of the cycle. For the calculations, the computational best estimate code ATHLET [2.3] was used, which is included in the software package AC2 and officially acquired by the national research Nuclear University MEPhI according to the license agreement with Gesellschaft fur Anlagen-und Reaktorsicherheit (GRS) gg GmbH, Germany [3]. Code ATHLET is certified in Russia for stationary and transient conditions at reactors with water coolant [4]. | ||||
Keywords | ||||
VVER-1000; Kalinin-3; MCP stop; LOCA; ATHLET | ||||
Statistics Article View: 427 PDF Download: 297 |
||||