أهم المشاکل المترتبة على عدم مراعاة الإعتبارات التصميمية فى طلاء المنتجات کهربياً

المراجع:

(1) Edwards, Joseph. "Electroplating--a Guide for Designers and Engineers." The Committee for the Promotion of Electroplating, (1983), p.72

 (2) Rudder, David M., and Atotech GMF Worldwide. "Effect of Part Design on Injection-Molding and Plating-on-Plastic Processing." Plating and surface finishing 95, no. 2 (2008), p.8.

(3)Arnold, Joseph R., Electroplating Process Director, and Guardian Automotive Trim. "High Quality Copper-Nickel-Chrome Plating on Plastics-A Continuous Process and its Challenges." Cell 812 (2003), p.360

 (4)Svenson,Eric."Durachrome hard chromium plating." Surface Finishing Technology (2006), p.22, p.23

(5) Schario, Mark. "Troubleshooting decorative nickel plating solutions (Part I of III installments): any experimentation involving nickel concentration must take into account several variables, namely the temperature, agitation, and the nickel-chloride mix." Metal Finishing 105, no. 4 (2007),p.34, p.36

 (6) Klein, Robert. "Immersion heaters: selection & implementation: immersion heaters are widely used in the chemical industry. These basics outline what is available, and how to select and maintain an immersion heater." Chemical engineering 113, no. 1 (2006), p.44, p.49

 (7)Snyder, Donald L. "Choosing and Troubleshooting Copper Plating Processes." Products Finishing 1 (2012), p.136

(8) Mandich, N. V, and Herb Geduld. "Understanding and troubleshooting decorative nickel electroplating systems—Part II: Poor covering in recesses, low ductility, and poor adhesion."Metal finishing 100, no. 6 (2002), p74

(9)http://index-of.co.uk/Tutorials-2/Electroplating%20-%20Plating%20Metals.pdf (date 10/7/ 2020)

 (10) Mandich, N. V. "Understanding & troubleshooting electroplating installations: Stray currents & bipolar effects."Plating and surface finishing 89, no. 3 (2002), p.40.

 (11) Mandich, N. V. "Troubleshooting Decorative Electroplating Installations-Part 5: Plating Problems Caused by Heat & Bath Temperature Fluctuations." Plating and surface finishing 88, no. 10 (2001), p.56

 (12) N.V. Mandich, Plating & Surface Finishing,(1998), p.87

 (13) Mandich, N. V., and D. W. Baudrand. "Troubleshooting electroplating installations: nickel sulfamate plating systems."Plating and surface finishing 89, no. 9 (2002), p.68, p.69.

 (14) Popov, Branko N., Jong-Won Lee, and Milos B. Djukic. "Hydrogen permeation and hydrogen-induced cracking." In Handbook of environmental degradation of materials,William Andrew Publishing, 2018, p.1 44, p.145

 (15) Tang PT. pulse reversal plating of nickel and nickel alloys for microgalvanics. Electrochim Acta. 2001 Sept 1;47(1), p.61.