COMPARATIVE STRUCTURAL STUDY OF INNOVATIVE STRENGTHENING PROPOSALS OF TIMBER BEAMS IN HISTORICAL BUILDINGS IN CAIRO USING TWO-LAYERED COMPOSITE SYSTEM
ABDEL-ATY, Y. (2020). COMPARATIVE STRUCTURAL STUDY OF INNOVATIVE STRENGTHENING PROPOSALS OF TIMBER BEAMS IN HISTORICAL BUILDINGS IN CAIRO USING TWO-LAYERED COMPOSITE SYSTEM. EKB Journal Management System, 7(7), 313-329. doi: 10.21608/shedet.2020.31782.1011
Yaser Y. Amin ABDEL-ATY. "COMPARATIVE STRUCTURAL STUDY OF INNOVATIVE STRENGTHENING PROPOSALS OF TIMBER BEAMS IN HISTORICAL BUILDINGS IN CAIRO USING TWO-LAYERED COMPOSITE SYSTEM". EKB Journal Management System, 7, 7, 2020, 313-329. doi: 10.21608/shedet.2020.31782.1011
ABDEL-ATY, Y. (2020). 'COMPARATIVE STRUCTURAL STUDY OF INNOVATIVE STRENGTHENING PROPOSALS OF TIMBER BEAMS IN HISTORICAL BUILDINGS IN CAIRO USING TWO-LAYERED COMPOSITE SYSTEM', EKB Journal Management System, 7(7), pp. 313-329. doi: 10.21608/shedet.2020.31782.1011
ABDEL-ATY, Y. COMPARATIVE STRUCTURAL STUDY OF INNOVATIVE STRENGTHENING PROPOSALS OF TIMBER BEAMS IN HISTORICAL BUILDINGS IN CAIRO USING TWO-LAYERED COMPOSITE SYSTEM. EKB Journal Management System, 2020; 7(7): 313-329. doi: 10.21608/shedet.2020.31782.1011

COMPARATIVE STRUCTURAL STUDY OF INNOVATIVE STRENGTHENING PROPOSALS OF TIMBER BEAMS IN HISTORICAL BUILDINGS IN CAIRO USING TWO-LAYERED COMPOSITE SYSTEM

Shedet
Article 18, Volume 7, Issue 7, 2020, Page 313-329  XML PDF (3.72 MB)
Document Type: research articles
DOI: 10.21608/shedet.2020.31782.1011
View on SCiNiTO View on SCiNiTO
Author
Yaser Y. Amin ABDEL-ATY
Caıro Unıversıty
Abstract
Traditional restoration and rehabilitation work of flat timber ceilings at historical Islamic buildings in Cairo generally require the dismantling of most of their timber parts (i.e. timber planks, secondary beams, etc.) to expose the timber main beams and conduct the work. Hence, these parts are liable to damage and lose during the dismantling that requires time, money and effort to achieve. Hence, the author conducted this study to overcome the dismantling work and propose effective strengthening techniques for the timber beams utilizing two-layered composite system. This paper reported the limited application of the layered system in the construction of the historical timber beams in Cairo. It studied a number of innovative strengthening proposals of the timber beams from their upper-side merely while leaving the exposed bottom surface intact, apart from its indispensable shoring. Hence, a small experimental and a wide comparative analytical investigation of the strengthening proposals utilizing two-layered composite system are conducted. Several 2D Finite Element numerical models using well-known software were conducted. The modelling techniques of various interfacial conditions of the two-layered beams are established and evaluation of the strengthening proposals is conducted. Finally, conclusions and recommendations are derived.
Keywords
Timber; Layered; Composite; Ceiling; Strengthening
References

REFERENCES

  1. Abdel-Aty (Yaser), "Proposals for seismic retrofitting of timber roofs to enhance their in-plane stiffness and diaphragm action at historical masonry buildings in Cairo", Journal of Cultural Heritage, Vol. 32, (2018) 73-83 (http://doi.org/10.1016/j.culher.2018.02.005).
  2. Abdel-Aty (Yaser), "Roles of timber tie-rods to reduce seismic vulnerability of historical buildings in Egypt", Proceedings of the Institution of Civil Engineers - Structures and Buildings (2019) (In-press: https://doi.org/10.1680/jstbu.19.00091).
  3. Abdel-Aty (Yaser), Study the role of timber roofs in the structural stability of arcades in historical mosques and the suitable restoration techniques, with application on one of the mosques in Cairo, the First International Conference for Urban Heritage in the Islamic Countries (UHIC), 23-28 May 2010, Riyadh, Kingdom of Saudi Arabia (Pub. Saudi Commission for Tourism & Antiquities, 2010) Ar159, on CD.
  4. Abdel-Samad (Wael), "Study on the effect of iron rust on properties of antique wood with the application of conservation and treatment on chosen objects", Master thesis, Cairo University, Faculty of Archaeology, Conservation department (2010).
  5. Chiara (Bedon) and Massimo (Fragiacomo), "Numerical analysis of timber-to-timber joints and composite beams with inclined self-tapping screws", Composite Structures, Vol. 207, (2019) 13-28 (https://doi.org/10.1016/ j.compstruct.2018.09.008).
  6. CSI (Computers and Structures Inc.), Analysis Reference Manual for SAP2000 ver.19: Linear and Nonlinear Structural Analysis Software, CSI, Berkeley, CA, USA, 2017.
  7. Daňková (Jana), Mec (Panvel) and Šafrata (Jiri), "Experimental investigation and performance of timber-concrete composite floor structure with non-metallic connection system", Engineering Structures, Vol. 193, (2019) 207-218 (https://doi.org/10.1016/j.engstruct.2019.05.004).
  8. FPL (Forest Products Laboratory), Wood Handbook, Wood as an Engineering Material, Centennial Edn. FPL, United States Department of Agriculture Forest Service, Madison, WI, USA, 2010, 5–7. (http://www.fpl.fs.fed.us, accessed in 09/05/2017).
  9. FSC (Foam Sheathing Coalition), IRC wall bracing: a guide for builders, designers and plan reviewers, Foam Sheathing Coalition, Woodbridge, UK, 2006 (www.foamsheathing.org; accessed 11/07/2019).
  10. Gindy (Ramez), "Archaeological and artistic study of timber ceilings during Mamluk era in Cairo through archives' documents and archaeological buildings", Master thesis, Cairo University, Faculty of Archaeology, archaeological Islamic department (2003).
  11. Giongo (Ivan), Schiro (Gianni) and Riccadonna (Daniele), "Innovative pre-stressing and cambering of timber-to-timber composite beams", Composite Structures, Vol. 226, Issue 111195, (2019) 37-48 (https://doi.org/10.1016/ j.compstruct.2019.111195).
  12. Gubana (Alessandra), "State-of-the-Art Report on high reversible timber to timber strengthening interventions on wooden floors", Construction and Building Materials, Vol. 97 (2015) 25-33 (http://dx.doi.org/10.1016/ j.conbuildmat.2015.06.035).
  13. Hajianmaleki (Mehdi) and Qatu (Mohammad), Mechanics of composite beams, advances in composite materials - analysis of natural and man-made materials, Dr. Pavla Tesinova (Ed.), InTech, Croatia, 2011 (http://www.intechopen.com/books/advances-in-composite-materials-analysis-ofnatural-and-man-made-materials/mechanics-of-composite-beams).
  14. Hamed (Safaa), "Study of changes in dissection composition for some species of archaeological woods under different deterioration causes and its appropriate conservation techniques, with application on some selected monuments", Ph.D. thesis, Cairo University, Faculty of Archaeology, Conservation department (2009).
  15. Hibbeler  (Russell), Structural Analysis, 9th Edition, Pearson Publication, US, 2014, pp. 83-124.
  16. Johnson (Robert), Composite Structure of Steel and Concrete, Vol. 1 (Second Edition), Blackwell, Scientific Publication, U.K., 1994, pp. 42-89.
  17. Mahir (Mostafa), Hadidi (Nesrin) and Abdel-Aty (Yaser), Study of structural deficiencies and damages in timber roofs at Islamic historic buildings in Cairo, their causes and methodology for restoration and retrofitting: Applying to Ghanim al-Bahlawan mosque in Cairo, the 4th International Conference of Restoration of Minia University, Faculty of Fine Arts, Minia Governorate, Egypt, (2015) 37-43.
  18. MHUUC (Ministry of Housing, Utilities & Urban Communities), Egyptian code of practice for calculating loads in structural and masonry work (ECP 201-2008), Cairo, Egypt, 2008 (in Arabic).
  19. MHUUC (Ministry of Housing, Utilities & Urban Communities), Egyptian code of practice for design and execution of masonry buildings (ECP 204-2005), Cairo, Egypt, 2005 (in Arabic).
  20. Monetto (Ilaria) and Campi (Francesca), "Numerical analysis of two-layer beams with interlayer slip and step-wise linear interface law", Engineering Structures, Vol. 144, (2017) 201-209 (http://dx.doi.org/10.1016/j.engstruct.2017.04.010).
  21. O'Loinsigh, C., Oudjene, M., Ait-Aider, H., Fanning, P., Pizzi, A., Shotton, E. and Meghlat, E., "Experimental study of timber-to-timber composite beam using welded-through wood dowels", Construction and Building Materials, Vol. 36, (2012) 245-250 (http://dx.doi.org/10.1016/ j.conbuildmat.2012.04.118).
  22. Ramadan (Zeinab), "Timber ceilings during Ottoman era", Master thesis, Cairo University, Faculty of Archaeology, archaeological Islamic department (1992).
  23. Sousa (João) and Silva (Amilton), "Analytical and numerical analysis of multilayered beams with interlayer slip", Engineering Structures, Vol. 32, (2010) 1671-1680 (http://dx.doi.org/10.1016/j.engstruct.2010.02.015).
  24. UNI (Ente Nazionale Italiano di Unificazione), UNI 11119:2004: Beni culturali – Manufatti lignei, strutture portanti degli edifice – Ispezioni in situ per la diagnosi degli elementi in opera, UNI, Milan, Italy, 2004 (in Italian).
  25. Wen (Jie), Sheikh (Abdul-Hamid), Uddin (Alhaz) and Uy (Brian), "Analytical model for flexural response of two-layered composite beams with interfacial shear slip using a higher order beam theory", Composite Structures, Vol. 184, (2018) 789-799.
Statistics
Article View: 896
PDF Download: 907