An Evaluation of Laser Cleaning as a Conservation Technique for an Archaeological Metal Coins

4.References

A. Siatou, D. Charalambous, et al.,  “A Comprehensive Study for the Laser Cleaning of Corrosion Layers due to Environmental Pollution for Metal Objects of Cultural Value: Preliminary Studies on Artificially Corroded Coupons” Laser Chemistry · January (2007) , p.1.

A.Gervais, M. Meier, et al., “ Cleaning Historical Metals: Performance of Laser Technology in Monument Preservation” Lasers in the Conservation of Artworks , LACONA VI Proceedings, Vienna, Austria, Sept. 21–25, (2005) ,p.39.

A.Sarzyński , K.Jach, et al., “Comparison of Wet and Dry Laser Cleaning of Artworks” Lasers in the Conservation of Artworks , LACONA VI Proceedings, Vienna, Austria, Sept. 21–25,( 2005),p.161.

Asmus, J.F., Murphy, C.G. and Munk, W.H., “Studies on the interaction of laser  radiation with art artifacts” Laser Technology II, SPIE Proceedings Volume 41, Bellingham ,USA,(1973).

B.Salle, P.Mauchien, S. Maurice, “ Laser-Induced Breakdown Spectroscopy in open-path configuration for the analysis of distant objects”. Spectrochimica Acta Part B: Atomic Spectroscopy,62(8) (2007) p. 739.

Capucine Korenberg and Alexandra Baldwin., “Laser Cleaning Tests on Archaeological Copper Alloys Using an ND:YAG Laser” Hindawi Publishing Corporation , Laser Chemistry, (2006) pp.1-7.

Carla Lucía Soto Quintana., “ Development and optimisation of protocols for surface cleaning of Cultural Heritage metals” Erasmus mundus master in archaeological  materials  science , University of  Évora , Évora, Portugal, September , (2016), PP.17-18.

Cooper M., “Laser Cleaning in Conservation An Introduction” Butterworth-Heinemann, Oxford,(1998).

E. Drakaki, A.G. Karydas, et al., “ Laser cleaning on Roman coins”Applied Physics A 79  Materials Science & Processing ,(2004) ,p.1111.

E. Drakaki,a B. Klingenberg, et al., “Evaluation of laser cleaning of ancient Greek, Roman and Byzantine coin ”Surface  Interface Analysis. 42, (2010 ),pp.671–674

G Buccolieri et al., “Analysis of selective laser cleaning of patina on bronze coins” Plasma Physics by Laser and Applications ,Journal of Physics: Conference Series , Conference Series 508,(2014),pp.4-5

M. Davis., “Laser Cleaning the Abergavenny Hoard: Silver Coins from the Time of William the Conqueror ” Lasers in the Conservation of Artworks , Lacona VI Proceedings, Vienna, Austria, Sept. 21–25,( 2005),p.47-51.

 Omar Abdel-Kareem, Awad Al-Zahrani, et al ., “Evaluating laser cleaning of corroded archaeological silver coins”Mediterranean Archaeology and Archaeometry, Vol. 16, No 1,(2016), pp. 135-143

Omar Abdel-Kareem, Awad Al-Zahrani, et al., “evaluating the use of laser in analysis and cleaning of the Islamic marine archaeological coins excavated from the Red Sea” International journal of conservation science, Volume 7, Issue 2, April-June 2016: 511-522, May,(2016),p.520.

Renzo Salimbeni.,“Laser techniques for conservation of artworks” Archeometriai Műhely,( 2006/1),p.37.

S. Siano, J. Agresti, I. Cacciari ,et al.,  “ Laser cleaning in conservation of stone, metal and painted artifacts:  state of the art and new insights on the use of the Nd:YAG lasers” Journal of Modern Physics , (2012) 106 , p.419.

Striebig, B.A., Roberts, T.L., et al., “Characterization of Emissions From Laser Removal of Surface Coatings” Conference of Laser Materials Processing, ICALEO, Jacksonville, (2001).

Tam, A.C., “laser-cleaning techniques for removal of surface particulates” Journal of Applied Physics, Vol.71, No.7, (1992), pp3515-3523.

V.P.Veiko1, T.Ju.Mutin, et al .,“Laser Cleaning of Metal Surfaces: Physical Processes and Applications” ,The International Society for Optical Engineering · January ,(2008)

Walid K. Hamoudi, Mehdi S. Edan, et al ., “ Laser surface cleaning of stones and some metal objects” The 5th International scientific Conference on Nanotechnology& Advanced Materials Their Applications 3-4 Nov,( 2015) ,p.973.

Watkins K.G., “A review of materials interaction during laser cleaning in art restoration” in: Kautek W., König E. (Eds.) “Lasers in the Conservation of Artworks” (LACONA I), Restauratorenblätter (Special Issue), Mayer & Comp., Vienna, (1997), p.7-15.

Watkins, K.G., “A review of materials interaction during laser cleaning in art restoration” In Kautek W., König E. (eds.) Lasers in the Conservation of Artworks (LACONA I), Restauratorenblätter (Special Issue), Mayer & Comp., Vienna, (1997), pp7-15.

Y.S. Koh , I. Sárady., “Cleaning of corroded iron artifacts using pulsed TEA CO2- and Nd:YAG-lasers” Division of Manufacturing Systems Engineering Department of Applied Physics and Mechanical Engineering Luleå University of Technology Luleå, Sweden, December, (2005) ,p.33.

Y.S. Koh, J. Powell, et al., “Laser Cleaning of Corroded Steel Surfaces: A Comparison with Mechanical Cleaning Methods” Lasers in the Conservation of Artworks , LACONA VI Proceedings, Vienna, Austria, Sept. 21–25,( 2005),p.13.

Yang Sook Koh., “Laser Cleaning as a Conservation Technique for Corroded Metal Artifacts” Ph.D., Division of Manufacturing Systems Engineering Department of Applied Physics and Mechanical Engineering Luleå University of Technology Luleå, Sweden, December, (2005),pp.7-11.