Studying the Influence of Rotor Speed and Diameter on the Proprties of Combed Rotor Spun Yarn. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 9, Volume 26, Issue 3, September 2001, Page 1-9 PDF (410.27 K) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.2021.145988 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Fawkia F. El-Habiby* | ||||
| Textile Department., Faculty of Engineering., El-Mansoura University., Mansoura., Egypt. | ||||
| Abstract | ||||
| In this work the influence of sliver preparation has been investigated with rotor speed and diameter. Three yarn counts (medium range) were produced, using carded and combed sliver. Each yarn was produced at three levels of rotor speed and two levels of rotor diameter. Properties of the produced yarns were examined. Results show that, increasing rotor speed deteriorates yarn regularity, strength, elongation and imperfections of combed yarns. Increasing rotor diameter reduced number of thin places. It also improved regularity of combed yans. | ||||
|
Statistics Article View: 73 PDF Download: 138 |
||||
