Phase Stability in Mechanically Alloyed Mn-30at.%Al
(2005). Phase Stability in Mechanically Alloyed Mn-30at.%Al. EKB Journal Management System, 28(2), 315-323. doi: 10.21608/ejs.2005.149331
. "Phase Stability in Mechanically Alloyed Mn-30at.%Al". EKB Journal Management System, 28, 2, 2005, 315-323. doi: 10.21608/ejs.2005.149331
(2005). 'Phase Stability in Mechanically Alloyed Mn-30at.%Al', EKB Journal Management System, 28(2), pp. 315-323. doi: 10.21608/ejs.2005.149331
Phase Stability in Mechanically Alloyed Mn-30at.%Al. EKB Journal Management System, 2005; 28(2): 315-323. doi: 10.21608/ejs.2005.149331

Phase Stability in Mechanically Alloyed Mn-30at.%Al

Egyptian Journal of Solids
Article 11, Volume 28, Issue 2, December 2005, Page 315-323  XML PDF (343.36 K)
Document Type: Original Article
DOI: 10.21608/ejs.2005.149331
View on SCiNiTO View on SCiNiTO
Abstract
Mechanical alloying of Mn-30at. % Al powder mixture resulted in the formation of an α-Mn solid solution in the early stage of milling with the subsequent formation of β-Mn phase after 30h milling. Thermal treatment at 10600 C, confirmed the recently extension of the high temperature ε-phase. However, the presence of impurity atoms, mainly iron, impeded the expected ε→β transformation during quenching. Such transformation is obtained by annealing the metastable ε-phase at 4000 C and was found to be time dependent. Magnetic properties assessments of both as milled and annealed alloy are carried out.
Statistics
Article View: 67
PDF Download: 103