Mg-Cr layered double hydroxide (LDH) intercalated with sodium dodecyl sulfate as sorbent for Alizarine Red-S in aqueous solutions | ||||
| Arab Journal of Nuclear Sciences and Applications | ||||
| Article 5, Volume 54, Issue 2, April 2021, Page 50-62 PDF (1.4 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ajnsa.2020.43981.1405 | ||||
 View on SCiNiTO | ||||
| Author | ||||
Ismail Ahmed 
| ||||
| Hot Laboratories Center, Atomic Energy Authority, 13759, Egypt. | ||||
| Abstract | ||||
| Abstract Mg2+/Cr3+-LDH, (LDH-CO3) with Mg/Cr molar ratio 2.0 and intercalated LDH with an anionic surfactant, sodium dodecyl sulphate, SDS-LDH were synthesized by co-precipitation method and was used for the sorption of Alizarine Red-S (ARS) as anionic organic dye. The prepared adsorbents were characterized by FTIR, XRD, TGA and surface area. The influence of pH of the medium, shaking time, dye concentration and adsorbents dose on the sorption process were investigated. The kinetics of the sorption process was extimated using the pseudo first-order, pseudo second-order, intra particle diffusion and Elovich kinetic model. The results of LDH-CO3 fitted well with the pseudo -first-order model while the pseudo -second-order model fitted with SDS-LDH results. The obtained results indicate that the intercalation with SDS enhanced the sorption process and can be considered as a promising adsorbent for the removal of anthraquinone compounds from wastewater. Regeneration of the adsorbent was achieved using 0.1 M sodium hydroxide solution. | ||||
| Keywords | ||||
| Sorption; Alizarine Red-R; LDH; Surfactant | ||||
|
Statistics Article View: 707 PDF Download: 338 |
||||
