A Kinetic Study of Removing Methylene Blue from Aqueous Solutions by Modified Electrospun Polyethelene Terephthalate Nanofibres | ||||
| Egyptian Journal of Chemistry | ||||
| Article 8, Volume 64, Issue 6, June 2021, Page 2803-2813 PDF (864.1 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejchem.2021.54843.3146 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Hozan Ahmed1; Parween Saleem 2; SUHAD YASIN  2; Ibtisam Saeed3
| ||||
| 1Pharmacy Department, Technical Institute Duhok, Duhok Polytechnic University, Iraq | ||||
| 2Department of Chemistry, College of Science, University of Duhok, Iraq | ||||
| 3Department of Physics, College of Science, University of Duhok, Iraq | ||||
| Abstract | ||||
| The present research study investigates the potential use of the novel polyethylene terephthalate (PET) nanofibers extracted from waste bottles. The electrospinning process creates nanofibers, which are then impregnated with dibenzo-18-crown-6 (DB18C6) (crown ether) to obtain a modified PET nanofiber. The use of modified PET nanofibers to remove methylene blue (MB) from aqueous solutions at different contact times, temperatures and initial dye concentrations is the prime concern of the present study. The amount of MB adsorbed at equilibrium (qe) is calculated at different temperatures (303, 313, and 323 K) and different concentrations (5, 10, 15 mg/g). The Kinetic and equilibrium studies of MB removal are carried out. The results indicate that the adsorption kinetics of MB can be described by the pseudo-second-order model. The activation energy value is below 40 kJ/mol and this gives an idea about the physisorption process. | ||||
| Keywords | ||||
| Electrospinning; Nanofibers; polyethylene terephthalate (PET); Adsorption; Dibenzo-18-Crown-6 (DB18C6) | ||||
|
Statistics Article View: 857 PDF Download: 486 |
||||
