Effect Of Different Surface Pretreatment Protocols On The Micro-Shear Bond Strength Of Resin Composite To Resin Infiltrated Demineralized Enamel
Ahmed, H., Hamza, N., Alhussiny, H. (2021). Effect Of Different Surface Pretreatment Protocols On The Micro-Shear Bond Strength Of Resin Composite To Resin Infiltrated Demineralized Enamel. EKB Journal Management System, 67(2), 1743-1751. doi: 10.21608/edj.2021.67388.1550
Hend Ahmed; Nermeen Hamza; Hossam Alhussiny. "Effect Of Different Surface Pretreatment Protocols On The Micro-Shear Bond Strength Of Resin Composite To Resin Infiltrated Demineralized Enamel". EKB Journal Management System, 67, 2, 2021, 1743-1751. doi: 10.21608/edj.2021.67388.1550
Ahmed, H., Hamza, N., Alhussiny, H. (2021). 'Effect Of Different Surface Pretreatment Protocols On The Micro-Shear Bond Strength Of Resin Composite To Resin Infiltrated Demineralized Enamel', EKB Journal Management System, 67(2), pp. 1743-1751. doi: 10.21608/edj.2021.67388.1550
Ahmed, H., Hamza, N., Alhussiny, H. Effect Of Different Surface Pretreatment Protocols On The Micro-Shear Bond Strength Of Resin Composite To Resin Infiltrated Demineralized Enamel. EKB Journal Management System, 2021; 67(2): 1743-1751. doi: 10.21608/edj.2021.67388.1550

Effect Of Different Surface Pretreatment Protocols On The Micro-Shear Bond Strength Of Resin Composite To Resin Infiltrated Demineralized Enamel

Egyptian Dental Journal
Article 16, Volume 67, Issue 2 - Serial Number 5, April 2021, Page 1743-1751  XML PDF (403.63 K)
Document Type: Original Article
DOI: 10.21608/edj.2021.67388.1550
View on SCiNiTO View on SCiNiTO
Authors
Hend Ahmed email orcid 1; Nermeen Hamzaorcid 2; Hossam Alhussinyorcid 3
1Lecturer of Restorative Dentistry, Faculty of Dentistry, The British University in Egypt, Cairo, Egypt
2Associate Professor of Conservative Dentistry, Faculty of Dentistry, October University for Modern Science and Art.
3Associate Professor of Operative Dentistry, Faculty of Dentistry, Suez Canal University, Egypt
Abstract
Aim: to assess micro-shear bond strength (µ-SBS) of composite using universal adhesive to resin infiltrated demineralized enamel after different surface pretreatments. Methodolgy: Thirty-six intact maxillary central incisors were used. Teeth were mounted in acrylic blocks. Specimens were divided into three groups ;Group 1: teeth with sound enamel were bonded to resin composite (positive control). Group 2: teeth were demineralized then bonded to resin composite (negative control). Group 3: teeth were demineralized followed by application of (Icon-DMG). The third group was divided into four subgroups according to surface pretreatment either no surface pretreatment, abrasive roughening, air abrasion, combination of roughening and air abrasion. All specimens except positive control were demineralized by demineralizing solution. In resin infiltration group, Icon (DMG) was applied following manufacturer’s instructions then specimen’s surfaces were treated as mentioned before. Etch and rinse approach using universal adhesive was applied before composite packing. Five 2millimeters long micro-tubes were mounted and held in place on the uncured adhesive. The adhesive coat was then light cured and composite was packed in the microtubes. Microtubes were peeled obtaining five microcylinders for µ-SBS testing. µ-SBS testing was done using a universal testing machine with orthodontic wire to produce shear forces. Results: statistically significant difference in µSBS values between different study groups was found. The highest µSBS mean values were in positive control, grinding and air abrasion groups, followed by no treatment group, combination group. While negative control yielded lowest µSBS values. Conclusion: surface pretreatment is mandatory to improve bonding to resin infiltrated enamel.
Keywords
Demineralized enamel; white spot lesions; resin infiltration; universal adhesive and micro-shear bond strength
Statistics
Article View: 256
PDF Download: 323