Chemical Vapour Deposition of CdS Thin Films at Low Temperatures from Cadmium Ethyl Xanthate | ||||
Egyptian Journal of Chemistry | ||||
Article 30, Volume 64, Issue 5, May 2021, Page 2533-2538 PDF (463.4 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/ejchem.2021.60695.3451 | ||||
![]() | ||||
Authors | ||||
Sabeeh Jassim![]() ![]() ![]() | ||||
1Department of Physics, College of Science, University of Misan, Maysan, Iraq | ||||
2Department of Chemistry, College of Science, University of Misan, Maysan, Iraq | ||||
3Department of Physcis, College of Science, University of Misan, Maysan, Iraq | ||||
4Department of chemistry, College of science, University of Kerbala | ||||
Abstract | ||||
Thin films of nanometer sized cadmium sulfide were directly prepared by aerosol-assisted chemical vapor deposition (AA-CVD) method, cadmium ethyl xanthate complex was used as precursor material at 225 oC, 250 oC and 275 oC. The thermal decomposition of complex was characterized by thermal analysis, (thermogravimetric analysis (TGA) and a differential scanning calorimetry (DSC)). The prepared CdS thin films have been characterized by XRD and SEM- EDX analysis. TGA curves ensured that the rapid decomposition of [Cd(S2COEt)2] gives a CdS in single step between 150 oC and 200 oC. XRD patterns confirmed that the CdS particles crystalized as a hexagonal crystallographic phase at low temperatures. The grain size of particles increased with increasing the preparation temperatures from 225 oC to 275 oC,. The spherical CdS nanoparticals were observed in SEM analysis. | ||||
Keywords | ||||
Chemical Vapour Deposition; Cadmium Sulfide, Thin Film; Low Temperatures | ||||
Statistics Article View: 717 PDF Download: 534 |
||||