Effect of Fiber Type, Yarn Properties and Fabric Structure on Colour Measurements. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 9, Volume 19, Issue 2, June 1994, Page 1-12 PDF (2.02 MB) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.2021.163682 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Abdel Latief Mohamed El-Hoseiny Salem* | ||||
| Textile Engineering Department., Faculty of Engineering.,El-Mansoura University., Mansoura., Egypt. | ||||
| Abstract | ||||
| Three types of cotton fibers were used in producing a wide range of yams. Count, twist factor, spinning parameters was varied at different levels. Twenty two plain and twill fabrics were produced from these yams. All fabrics were dyed under the same conditions with Ciba reactive dye Blue-3G.E. The effect of fiber, yam and fabric variables on colour measurements was Investigated. Hue, Chroma, Lightness, Colour Strength and colour depth was measured. It was found that cotton type, spinning process, count, twist multiplier and fabric structure affect significantly colour measurements. | ||||
|
Statistics Article View: 54 PDF Download: 157 |
||||
