Investigation the some Disturbance of Fabric Width Variation at Sulzer Weaving Machine of Twin Beams. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 12, Volume 18, Issue 2, June 1993, Page 24-40 PDF (468.74 K) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.2021.165323 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Ali Ismaiel Moursi* | ||||
| BSC., Mechanical Power Engineering Department., Faculty of Engineering., Alexandria University., DSC. ETHZ. | ||||
| Abstract | ||||
| Variation of fabric width at the twin beams sulzer weawing machine was represented as source of many technological complaints. Therefore the effect of fabric width on the dynamic and static warp tension, motion behaviour of twin beams, and the fabric properties such as weft and warp density and fabric dimensions has been examined. The results indicated that, there are significant difference between the dynamic tension of the upper and lower shed, also static tension increases by the increase in fabric width. Also that vaviation in fabric width affect the motion advance of ward beam in the side of the wider fabric, than that of the side or narrower fabric (Picking side), and hence creates warp waste (1,44%) greater than that of equal fabric width (0,134%), and both warp, weft and fabric dimensions. | ||||
|
Statistics Article View: 57 PDF Download: 119 |
||||
