THREE-DIMENSIONAL PRINTING AS A POTENTIALLY EFFECTIVE STRATEGY FOR IMPROVING THE OUTCOMES IN MICROTIA RECONSTRUCTION
El-Bayoumi, O., Bahaa Eldin, A., Mahmoud, F., Zeina, A., Abdelhalim, M. (2021). THREE-DIMENSIONAL PRINTING AS A POTENTIALLY EFFECTIVE STRATEGY FOR IMPROVING THE OUTCOMES IN MICROTIA RECONSTRUCTION. EKB Journal Management System, (), -. doi: 10.21608/ejprs.2021.69749.1066
Omar Mohammed Attia El-Bayoumi; Ahmed Bahaa Eldin; Fayez Shahatto Mahmoud; Ahmed Mahmoud Zeina; mostafa M. Abdelhalim. "THREE-DIMENSIONAL PRINTING AS A POTENTIALLY EFFECTIVE STRATEGY FOR IMPROVING THE OUTCOMES IN MICROTIA RECONSTRUCTION". EKB Journal Management System, , , 2021, -. doi: 10.21608/ejprs.2021.69749.1066
El-Bayoumi, O., Bahaa Eldin, A., Mahmoud, F., Zeina, A., Abdelhalim, M. (2021). 'THREE-DIMENSIONAL PRINTING AS A POTENTIALLY EFFECTIVE STRATEGY FOR IMPROVING THE OUTCOMES IN MICROTIA RECONSTRUCTION', EKB Journal Management System, (), pp. -. doi: 10.21608/ejprs.2021.69749.1066
El-Bayoumi, O., Bahaa Eldin, A., Mahmoud, F., Zeina, A., Abdelhalim, M. THREE-DIMENSIONAL PRINTING AS A POTENTIALLY EFFECTIVE STRATEGY FOR IMPROVING THE OUTCOMES IN MICROTIA RECONSTRUCTION. EKB Journal Management System, 2021; (): -. doi: 10.21608/ejprs.2021.69749.1066

THREE-DIMENSIONAL PRINTING AS A POTENTIALLY EFFECTIVE STRATEGY FOR IMPROVING THE OUTCOMES IN MICROTIA RECONSTRUCTION

The Egyptian Journal of Plastic and Reconstructive Surgery
Articles in Press, Accepted Manuscript, Available Online from 25 April 2021  XML
Document Type: Original Article
DOI: 10.21608/ejprs.2021.69749.1066
View on SCiNiTO View on SCiNiTO
Authors
Omar Mohammed Attia El-Bayoumi1; Ahmed Bahaa Eldin2; Fayez Shahatto Mahmoud3; Ahmed Mahmoud Zeina email orcid 4; mostafa M. Abdelhalim5
1Plastic Surgery Department, Faculty of Medicine, Mansoura university
2Faculty of Medicine,Mansoura University
3General Surgery Department, Mansoura university
4assistant professor of plastic surgery, Mansoura university
5Plastic and Reconstructive surgery department, Mansoura university
Abstract
ABSTRACT:

Aim: The reconstruction of microtia cases is a challenging topic and Auricular reconstruction is a unique area of facial plastic surgery where a wide array of reconstructive options often must be considered. The goal is to assess the use of three-dimensional (3D) printing to create a 3D model for use during reconstruction to achieve better aesthetic results.

Patients and methods: This study included ten patients with microtia. Two stages of ear reconstruction, the authors used a 3D printed auricular model of the contralateral ear as an intraoperative guide. The Mansoura ear reconstruction scale was conceptualized and used by the authors to assess the final aesthetic outcomes.

Results: In total there were 10 patients with 11 affected auricles. Results were 6 patients with an excellent result, 3 patients with a very good result and one patient with a fair result according to Mansoura ear reconstruction scale.

Conclusions: To conclude, the use of a 3D printed auricular model specific to each patient for microtia reconstruction led to excellent results and patient satisfaction after reconstruction. The use of 3D printed models for microtia reconstruction resulted in an overall increase in aesthetic outcomes and increased patient satisfaction.

Keywords: Auricular model - Costal cartilage - 3D printing - Ear reconstruction- Microtia -Tissue expander.
Keywords
Auricular model; 3D printing; Microtia
Statistics
Article View: 122