EVALUATION OF HOT MIX ASPHALT AND BINDER PERFORMANCE MODIFIED WITH HIGH CONTENT OF NANO SILICA FUME

[1]   M. Zahid, Mrinal, Takumi,, "Evaluation of viscosity and rutting properties of nanoclay-modified asphalt binders," in Geo-Congress 2014: Geo-characterization and Modeling for Sustainability, 2014, pp. 3695-3702.

[2]   S. K. Maram Saudy, "Evaluation of normal and modified asphalt according to conventional and modern grading systems," DOI: 10.14455/ISEC.res.2016.58, Proceedings of the First European and Mediterranean Structural Engineering and Construction, At Istanbul, Turkey, 2016.

[3]   S. Lv, L. Hu, C. Xia, M. B. Cabrera, Y. Guo, C. Liu, et al., "Recycling fish scale powder in improving the performance of asphalt: A sustainable utilization of fish scale waste in asphalt," Journal of Cleaner Production, vol. 288, p. 125682, 2021.

[4]   P. H. Yeh, Y. H. Nien, J. H. Chen, W. C. Chen, and J. S. Chen, "Thermal and rheological properties of maleated polypropylene modified asphalt," Polymer Engineering & Science, vol. 45, pp. 1152-1158, 2005.

[5]   G. Polacco, P. Kříž, S. Filippi, J. Stastna, D. Biondi, and L. Zanzotto, "Rheological properties of asphalt/SBS/clay blends," European Polymer Journal, vol. 44, pp. 3512-3521, 2008.

[6]   N. I. M. Yusoff, A. A. S. Breem, H. N. Alattug, A. Hamim, and J. Ahmad, "The effects of moisture susceptibility and ageing conditions on nano-silica/polymer-modified asphalt mixtures," Construction and Building Materials, vol. 72, pp. 139-147, 2014.

[7]   G. Moussa, A. Abdel-Raheem, and T. Abdel-Wahed, "Investigating the moisture susceptibility of asphalt mixtures modified with high-density polyethylene," JES. Journal of Engineering Sciences, vol. 48, pp. 765-782, 2020.

[8]   Y. M. Alghrafy, E.-S. M. Abd Alla, and S. M. El-Badawy, "Phase angle master curves of sulfur-extended asphalt modified with recycled polyethylene waste," Innovative Infrastructure Solutions, vol. 6, p. 84, 2021/01/21 2021.

[9]   S. Karahancer, M. Enieb, M. Saltan, S. Terzi, E. Eriskin, A. Cengizhan, et al., "Evaluating mechanical properties of bitumen and hot mix asphalt modified with nano ferric oxide," Construction and Building Materials, vol. 234, p. 117381, 2020.

[10]  M. Saltan, S. Terzi, and S. Karahancer, "Performance analysis of nano modified bitumen and hot mix asphalt," Construction and Building Materials, vol. 173, pp. 228-237, 2018.

[11]  M. Saltan, S. Terzi, and S. Karahancer, "Examination of hot mix asphalt and binder performance modified with nano silica," Construction and Building Materials, vol. 156, pp. 976-984, 2017.

[12]  M. Enieb and A. Diab, "Characteristics of asphalt binder and mixture containing nanosilica," International Journal of Pavement Research and Technology, vol. 10, pp. 148-157, 2017.

[13]  H. Ezzat, S. El-Badawy, A. Gabr, E.-S. I. Zaki, and T. Breakah, "Evaluation of asphalt binders modified with nanoclay and nanosilica," Procedia engineering, vol. 143, pp. 1260-1267, 2016.

[14]  F. S. Bhat and M. S. Mir, "Performance evaluation of nanosilica-modified asphalt binder," Innovative Infrastructure Solutions, vol. 4, p. 63, 2019/11/19 2019.

[15]  A. W. Oda, A. El-Desouky, H. Mahdy, and O. M. Moussa, "Effects of asphalt modification by Nanosilica and Nanoclay on asphalt binder and hot mix asphalt properties," in IOP Conference Series: Materials Science and Engineering, 2020, p. 012003.

[16]  F. C. Martinho and J. P. S. Farinha, "An overview of the use of nanoclay modified bitumen in asphalt mixtures for enhanced flexible pavement performances," Road Materials and Pavement Design, vol. 20, pp. 671-701, 2017.

[17]  J. Crucho, L. Picado-Santos, J. Neves, and S. Capitão, "A Review of Nanomaterials’ Effect on Mechanical Performance and Aging of Asphalt Mixtures," Applied Sciences, vol. 9, p. 3657, 2019.

[18]  N. Abutalib, E. H. Fini, S. Aflaki, and T. M. Abu-Lebdeh, "Investigating effects of application of silica fume to reduce asphalt oxidative aging," American Journal of Engineering and Applied Sciences, vol. 8, pp. 176-184, 2015.

[19]  T. C. Holland, Silica fume user's manual: Federal Highway Administration, 2005.

[20]  X. Zheng, W. Xu, H. Feng, and K. Cao, "High and Low Temperature Performance and Fatigue Properties of Silica Fume/SBS Compound Modified Asphalt," Materials, vol. 13, p. 4446, 2020.

[21]  M. G. Al-Taher, H. D. Hassanin, M. F. Ibrahim, and A. M. Sawan, "Investigation of the Effect of Adding Silica Fume on Asphalt Concrete Properties," International Journal of Engineering Research, vol. 7, pp. 48-55, 2018.

[22]  G. Shafabakhsh, O. J. Ani, and S. Mirabdolazimi, "Experimental investigation on rutting performance of microsilica modified asphalt mixtures," International Journal of Engineering Research & Technology (IJERT), vol. 4, pp. 371-378, 2015.

[23]  H. H. Zghair, H. H. Joni, and M. S. Hassan, "Evaluation of the effect of mixing conditions of micro-silica modified asphalt binder," in IOP Conference Series: Materials Science and Engineering, 2019, p. 022048.

[24]  H. H. Zghair, H. H. Joni, and M. S. Hassan, "Influence of micro-size silica powder on physical and rheological characteristics of asphalt binder," International Journal of Engineering & Technology, vol. 7, pp. 180-184, 2018.

[25]  H. H. Zghair, H. H. Joni, and M. S. Hassan, "Evaluating The Effects of Micro and Nano Size of Silica Filler on Asphalt Cement Properties," Engineering and Technology Journal, vol. 38, pp. 1832-1841, 2020.

[26]  O. A. Ahmad, "Production of high-performance silica fume concrete," American journal of applied sciences, vol. 14, pp. 1031-1038, 2017.

[27]  R. Bajpai, K. Choudhary, A. Srivastava, K. S. Sangwan, and M. Singh, "Environmental impact assessment of fly ash and silica fume based geopolymer concrete," Journal of Cleaner Production, vol. 254, p. 120147, 2020/05/01/ 2020.

[28]  EGPC, "Egyptian General Petroleum Corporation," http://www.egpc.com.eg/, 2021.

[29]  ASTM D5 / D5M-20, "Standard Test Method for Penetration of Bituminous Materials," ASTM International, West Conshohocken, PA, 2020.

[30]  ASTM D36 / D36M-14(2020), "Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)," in ASTM International, West Conshohocken, PA, 2020.

[31]  ASTM D4402 / D4402M-15, "Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer," in ASTM International, West Conshohocken, PA, 2015.

[32]  ASTM C127-15, "Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate," ASTM International, West Conshohocken, PA, 2015.

[33]  ASTM C131 / C131M-20, " Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine," ASTM International, West Conshohocken, PA, 2020.

[34]  Housing and Building National Research Center, "Egyptian Code of Practice for Urban and Rural Roads—Part 4. Road Material and Its Tests," Housing and Building National Research Center: Cairo, Egypt, 2008.

[35]  ASTM D70 / D70M-21, "Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method)," ASTM International, West Conshohocken, PA, 2021.

[36]  ASTM D6926-20, "Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus," ASTM International, West Conshohocken, PA, 2020.

[37]  ASTM D2726 / D2726M-19, " Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures," ASTM International, West Conshohocken, PA, 2019.

[38]  J. W. Read, David,, The shell Bitumen Handbook: Thomas Telford,, 2003.

[39]  ASTM D6931-17, "Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures," ASTM International, West Conshohocken, PA, 2017.

[40]  H. Wen, S. Bhusal, and X. Li, "Double punch test: simple performance test to evaluate the fatigue and rutting potential of asphalt concrete," Journal of Materials in Civil Engineering, vol. 25, pp. 645-652, 2013.

[41]  G. S. Moussa, A. Abdel-Raheem, and T. Abdel-Wahed, "Effect of Nanoclay Particles on the Performance of High-Density Polyethylene-Modified Asphalt Concrete Mixture," Polymers, vol. 13, p. 434, 2021.

[42]  R. A. Jimenez, "Testing for debonding of asphalt from aggregates," 1973.

[43]  D. Risović, S. M. Poljaček, K. Furić, and M. Gojo, "Inferring fractal dimension of rough/porous surfaces—A comparison of SEM image analysis and electrochemical impedance spectroscopy methods," Applied Surface Science, vol. 255, pp. 3063-3070, 2008.

[44]  I. Amin, S. M. El-Badawy, T. Breakah, and M. H. Ibrahim, "Laboratory evaluation of asphalt binder modified with carbon nanotubes for Egyptian climate," Construction and Building Materials, vol. 121, pp. 361-372, 2016.

[45]  M. Greysmith, Bituminous Materials in Road Construction: HM Stationery Office, 1962.

[46]  Y. M. Alghrafy, E.-S. M. Abd Alla, and S. M. El-Badawy, "Rheological properties and aging performance of sulfur extended asphalt modified with recycled polyethylene waste," Construction and Building Materials, p. 121771, 2020.

[47]  AASHTO-M320, "Standard Method of Test for Performance Graded Asphalt Binder," American Association of State and Highway Transportation Officials: Washington, DC, USA,, 2016.

[48]  M. O. Azzam, Z. Al-Ghazawi, and A. Al-Otoom, "Incorporation of Jordanian oil shale in hot mix asphalt," Journal of Cleaner Production, vol. 112, pp. 2259-2277, 2016.

[49]  Asphalt Institute, Mix design methods for asphalt concrete and other hot-mix types: Asphalt Institute, 1969.

[50]  B. V. Kok and M. Yilmaz, "The effects of using lime and styrene–butadiene–styrene on moisture sensitivity resistance of hot mix asphalt," Construction and building materials, vol. 23, pp. 1999-2006, 2009.

[51]  M. Hasaninia and F. Haddadi, "The characteristics of hot mixed asphalt modified by nanosilica," Petroleum Science and Technology, vol. 35, pp. 351-359, 2017.

[52]  L. F. Walubita, A. N. Faruk, L. Fuentes, A. Prakoso, S. Dessouky, B. Naik, et al., "Using the Simple Punching Shear Test (SPST) for evaluating the HMA shear properties and predicting field rutting performance," Construction and Building Materials, vol. 224, pp. 920-929, 2019.

[53]  A. N. Faruk, S. I. Lee, J. Zhang, B. Naik, and L. F. Walubita, "Measurement of HMA shear resistance potential in the lab: The Simple Punching Shear Test," Construction and Building Materials, vol. 99, pp. 62-72, 2015.

[54]  M. Enieb, A. Diab, and X. Yang, "Short- and long-term properties of glass fiber reinforced asphalt mixtures," International Journal of Pavement Engineering, vol. 22, pp. 64-76, 2021/01/02 2021.