Effect of Harnesses Crossing Angle and Shed Size on Yarn Stops during Weaving on an Air Jet Machine. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 23, Volume 15, Issue 1, June 1990, Page 24-35 PDF (102.61 K) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.2021.171003 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Mahmoud Salama* | ||||
| Assistant Professor., Textile Engineering Department., Faculty of Engineering., El-Mansoura University., Mansoura., Egypt. | ||||
| Abstract | ||||
| In this work, it was found that, on air jet weaving machine, the increase in the harnesses crossing angle as well as the shed size enhanced the process of weft insertion. The matter which resulted in a reduction in weft stops. The warp stops were raised when the harnesses crossing angle and the shed size were increased. A harnesses crossing angle of 320o and shed size of 32o, showed a low number of weft stops and warp stops per cmpx during weaving. | ||||
|
Statistics Article View: 71 PDF Download: 135 |
||||
